Search results

When I engage the pto on my 7060, the light that tells you to increase the rpm’s durring a regen comes on. It stays on until I turn the pto off but the tractor never goes into regen. the light will come on and I can bring it to idle and it will still go off. No beeps or other lights are coming...

It is the fitting right below #100 on the end of the cylinder that attaches to the links. Can’t find part number anywhere and kubota dealer does not know. thank you

Sorry for the dumb question but I am not at all familiar with testing electrical components. I have an air ride seat in my M7060 and the pump has stopped working. when you hit the switch to air up the seat, nothing happens. I could have a bad switch or bad pump. I have checked all the fuses...

My air ride seat quit today and I need to get behind the rubber grommet to check the wires. Is there any secret on how to get the rubber out of the way without tearing it up?

I have a 200 gallon agg spray sprayer and I bent one of the booms yesterday. It is bent about 20-25 degrees. It is too strong to bend it back without using heat of a bending machine. the sprayer has a chain that on each boom that connects to the tip and the fram to keep it from sagging while...

Does anybody know the thread size for a M7060 radio antenna? mine came off the bracket on top of my cab. thanks

Yesterday I cranked my 7060. I immediately noticed that my dad had shut the engine off 2 weeks before while in regen mode. I ran the Rpms up to 2200 ( while parked) and there was a whining noise coming out of the exhaust pipe. It also was letting puffs of white/ grey smoke out and making a...

It is time for me to clean/flush my radiator on my M7060. What is the best product to use for the clean and flush?

Has anybody tried a wicked tooth bar? They look impressive.

When are you supposed to change the oil in your bush hog? I have a bush hog 3308 and it does not mention it in the manual ( or I overlooked it)

Does anybody know if their is a company that makes aftermarket seat belts for Kubota tractors? My seat belt tightens with every bump I hit and is a pain in the ass but I know you got to wear one in a cab tractor. I want one that works like the one in my truck. thanks

The speakers in my m7060 are about to go. Has anybody ever replaced their speakers with aftermarket units that are better? I am not looking for Bose surround sound just something that is clear on the higher volumes you need to listen to pod casts/phone calls while running the machine. thanks

I have a 2017 M7060 that I bought new. I noticed the last few times I used it the steering was mushy. Can really describe it except it is not smooth. Everything else is fine and machine has been serviced. I don’t notice any leaks. Any ideas? I got the machine new. Cab tractor 4x4 with 12...

I have a 15 year old Bushhog brand 8 foot heavy duty cutter with the semi mount. Good working condition. Does anybody have an idea of what this is worth? I am thinking of upgrading to a new and bigger unit. A new one is $6,000 Thanks

The radio in my m7060 is asking for a PIN number to connect to my phones Bluetooth. Does anybody know the factory PIN number? Sorry for the sorry dumb ass question but I am not getting any fm stations where I am today.

I am helping a friend do the 50 hour maintenance on his new mx5200 hst and I can’t find the dipstick got the hydraulic fluid to save my life. It is a rops tractor. Any help would be appreciated

I have a Forrest city do all that needs some new rims. The rims that are on the plow now are 12 lug 15 inch but the axles only have 6 lugs on them. I have been running 235/75 r15 tires for years. How do I measure this wheel? Can I just measure it using the 6 lugs used. Thanks

What rpm should I be using when bushogging, etc. On my old 6800 I kept it at 2200 but this new machine will go up to near 2600. Do you operate it wide open because of the dpf? When bushogging there is a vibration at 2200 but it goes away around 2400 rpm. Thanks for the advice. I am having to...

I have a 7060 which has a turbo. I have always been told to let machines with turbo's idle for a while so the turbo can slow down and still get oil. Is this still a big deal? I have a guy that helps me and he just turns the machine off because that is what he has been doing for 60 years.

Are there any other places on the web to order kubota parts from? I need an ac vent grill and the part is $25 but they want $16 for shipping. Damn think only weighs a few ounces. I don’t live near a dealer.