Search results

Check McMaster Carr for the bushings you are looking for.

Taken this morning.

I thought about filling them with foam. The sales guy said it was not a good idea to fill them. He said that it would cause front axle trouble. When I know that we are done with the snow I will take the tires to the tire shop and get them filled. Then restud them.

I have no plans to pick them up.

I put over 1000 studs in my tractor tires this fall. Almost all the studs in the front tires are gone. Only a few came out of the rear tires. When the studs were all there they worked great on packed snow and ice. I need to get a plan figured out before next winter. I have a couple of side...

We cleared the driveway twice yesterday. We got around 20" of snow. The driveway is not frozen so I made a mess. Keep digging in to the gravel and putting it on the lawn for safe storage. The snow was very heavy and wet. Sometimes the snowblower acted like a plow and pushed the pile along...

We cleaned the snow once today. Now it stopped snowing. Time to do the Finnish cleaning. Got a fair amount of snow. Maybe a foot or so. I bought a trailer this week. Just waiting for the GVW sticker to come in. Being hooked up to a commercial pickup truck it needs to be under 10,000 pounds...

Today I cleared the driveway again. Also filled the wood box and the wood rack in the house for the wood stove. Got our first oil delivery since November 28,2022 and it was just under 67 gallon. We use oil for hot water also. Not to bad for the first winter trying to heat the house with the...

We got snow Thursday night. I cleaned most of it up. Our daughter was cleaning off the cars and trucks. When we moved them I got her in the tractor for the first time. She did great snow blowing. The backing up thing kinda had her a little confused. Maybe by this time next year I will have...

If that is a new well you should have them come back and fix where the wire conduit goes into the well cap. That is a good way for a mouse or snakes to get into your well.

I would say buff it with a Scotch bright pad and install new bushings and call it good.

When we lived in Kansas ,we would go to the farm auctions. I was looking for a welder and torch setup. They usually went for higher than new price.

Where did you get them from.? I might get a set for the front of my tractor.

They also look like great tie points for chains for transport.

I looked around on the interwebs and found a couple. I will wait until winter is over to start looking. If I have to buy new I will. Prefer not too,but ...

I did not even think of that. I guess I will have to buy one of the blowers. Maybe I can buy just the blower and not the whole kit?

This is going to be one of the projects that I work on over the summer. I have a land pride snow blower on the rear now. I am going to try to make that work.

I just bought two #40 code 61 flange hose end for a hose on a customers drill the fittings cost me $546 each plus the hose. I bought a Aeroquip hydraulic hose machine,hose and a fitting assortment up to #20 four wire and it cost enough to by a new 45hp tractor with a cab. Every time I reorder...

Does the frame stay on all the time? Did you use existing hole in the frame or did you have to drill new holes. This is exactly the type of setup I am looking for. Being able to leave the loader frame on and use the front mount snow blower.

The bit weight is around 5000 pounds