Search results

It's a fantastic build -- very professional. But if he tried to make them for a living he'd have to compete with all the internet forums complaining nice cabs cost too much. $1,200 materials + 120 hours x (say) $40/hr = $6,000 right there with no provision for overhead (like heating the shop...

Over what? Seconds, minutes, hours or days? They all drift down right from the factory, it's only a question of how fast they drift down. For comparison, my B7100 with similar hours will take about 2 days for the 3ph to fully drop a 400lb snowblower from max lift to the ground.

Leave the tractor relief setting as stock. Yes,, some of Kubota's loaders could be had with an optional PTO pump, depending on the tractor they were being fitted to, which may explain the manual's numbers. But as you have discovered, adjusting your FEL relief lower will reduce 3PH capacity...

Yes, some of it looks very familiar! <lol> The design has served me well over the years and I'm glad to see it is of use to someone else. I would echo Wolfman's comments and replace the top bar with round though. Even heavy-wall pipe would bear against the round retainers better than square...

I'm thinking something like a stripped spline or gear is more likely than a bad bearing. But one way or the other, things have got to come apart.

The way you have it is not "wrong" per se, just not ideal. Your clamp strap is sloping downward towards the work piece (sloping upward would be wrong). But if you look at the engagement of the heel steps to the block, they are not fully seated -- they can't be, they are on an arc, probably only...

I was so busy being a smart-ass, I forgot to answer your question: I have two of the S191 sets. I've never used the v-base or the wedge base. I do upon occasion find a need for both sets at once when trying to support an irregularly shaped item and I have very rarely needed the point screw. I...

What do you mean by "during operation of the hydraulic system"? Do you mean it only leaks when you actuate the 3 point hitch lift control (or other hydraulic attachment)? Or when you try to drive forward/backward?

Yup. As you are finding out, the cost of a lathe or mill is only a part of the cost. Tooling and metrology can double the investment. But having the ability to machine metal means you can make your own. A production shop might buy the tooling because they can make more money with their time. A...

The S190 shown is 20 pitch threads -- nice and strong. The SF190 is 40 pitch threads -- matches the threading of your micrometer. The S191 has a smaller base diameter and can squeeze into a smaller space. Step away from the bed frame, put the UPS driver on alert, mortgage the house and buy 2...

Next line down: PTO (claimed) 21HP ;)

If the tractor has a governor that can be set that way, sure. That's how the genset works. My tractor doesn't have such a governor but others might.

Ultimately you were not wrong in that one cannot magically increase the entropy of the system by changing pulley (or gear) ratios. One can only convert, trading one characteristic for another. Where one characteristic goes up, another goes down. So let's look at the specifics of this case: An...

HP = speed x torque. You can't change one without affecting at least one other. Six times more speed means six times less torque.

I don't question the effect of liquid in the tires of lowering the centre of gravity, and therefore improving side-to-side stability. I am however drawing a distinction between side-to-side stability vs fore-and-aft stability, within the context of the OP removing his backhoe.

I've thought about doing that -- getting the extra chains out of the way would sometimes be nice and a pulley at the top would also maximize use of available height -- but think I would want the winch control available outside the cab more than inside. Maybe something with a wired or wireless...

I did the WW fill. -45° C freeze point. No problems in winter. No signs of corrosion a few years later when I changed tires. I think most of the pros and cons of liquid weight (I hesitate to call it "ballast" -- to me "ballast" implies "counterweight") have been touched upon already, but I...

I made one: (build thread here)

Rules of troubleshooting: 1. Check the simplest possible cause first: it's cheap, fast and usually the problem. 2. What did you do just before the problem occurred? Again, often the cause...

Ah, true. Although if one is using the backhoe correctly, the load is on the stabilizers not the axle. Back to "owner abuse vs design flaw".