Search results

WTB a hydraulic filter housing for a Kubota B8200HST. Part #66301-37810

Can someone verify that a belly mover can be used on the B8200 without removing the FEL?

The arms will fall down after the engine is off for some time. When the engine starts the arms come full up. The lever on the control valve has no effect. Lots of force will not move the arms down. FEL works fine...maybe a little slow. I noticed that the return from the FEL valve is plumbed...

deleted post

Need a Kubota workshop manual for a B8200.

Which Kubota does this dash fit

I used it to rebuild engine, so the engine section has some grease finger prints, otherwise pristine. $75 Shipped

I am changing the dash panel and I cannot determine how to disassembly the light/signal switch for fear of breaking it. Some help please.

2010 Kubota L3400DT with a 35 HP Diesel, 4WD tractor with NEW engine. It is a 3-cylinder, 1.8L engine with an hour on it. Brand new Duracell 12v battery. The manual transmission has four gears (1-4) in two ranges (Low/High) and reverse (R). Mechanical shuttle shifting between forward-low...

Would someone please send me the crank clearances for a D1803 engine? I purchased a service manual for the L3400, but the engine specs are for the D1703, which are different. I would appreciate any help or reference to where I can find or buy the specs.

I have an D1803 engine from a L3400 with a big hole in cylinder wall #3. The connecting rod is bent and the piston is really destroyed. Two push rods are also bent. No visible damage to the head. The crank does not appear damaged at all. The other two cylinders appear normal. The oil does...

I have looked online for a used engine or block, but no success. Any help would be appreciated.

Need replacement R4 tires and wheels for front of Kubota L3750. Original was 9.5-16. The wheels are 6 hole, 6 inch spacing. Would like slightly larger diameter wheel with the correct spacing.