Search results

As promised, here is the latest in my B3350 saga. For those of you who do not know, I bought mine in May of 2018. It now has 32 hours on the clock, about 10 of which I put on doing actual work. It was new on a shipping carrier when I bought it and was inspected before delivery to assure that...

Mowed for about four hours with the L6060 and Woods BB720X HD 6' cutter yesterday. Parcel is mostly fescue and orchard grass, is irregular, some places steep and lots of obstacles. M9960 with either Woods BB840X, 7' cutter or, especially 15' BW is not practical here due to the many obstacles...

Folks, I guess it's time for me to stop bragging about my flawless 1993 B1750. Today, while mowing with the 60" MMM, the spring that returns the hydro pedal to neutral failed. I finished the section that I was working on by returning the pedal to neutral with my hand but decided not to try to...

After shopping off and on for nearly two years, I finally pulled the trigger on a bat wing mower. I shopped Woods, Bush Hog and Land Pride before buying a new design Woods BW 15.50 with eight aircraft tires (I have some soft ground) and optional LED light kit. For multiple reasons, my favorite...

Folks, this has been a struggle. I bought my B3350 ROPS with FEL in June of 2018 but did not buy a MMM because I did not need one. Recently, I found and bought a like new, low hour RC72-30B MMM for a price that I was willing to pay, knowing that I might never use it. It was removed from a...

Today, I saw a Kubota walk behind lawn mower at my dealer. It had a 179CC recoil start Kawasaki engine with a replaceable oil filter, cast aluminum deck, and three speed transmission for the RWD. Truly a premium unit aside from the recoil start. It had been special ordered for a customer. The...

Recently, I stumbled across a very low hour 6' MMM in excellent condition that had been removed from a B3030 trade in. The buyer of the 3030 did not want the MMM so I bought it with all hardware and owners manual. One does not find these things separately, let alone in pristine condition. I may...

Though late, I'm finally getting around to finding a hard rubber or poly cutting edge for the V5060 snow plow on my RTV-X1100C. Kubota does not offer such cutting edge. Anyone Know where I can get one, hopefully, but not necessarily, pre-drilled. SDT

I stumbled across a used 72" MMM from a B3030 that I believe will bolt onto my B3350 without modifications or any different brackets. Anyone know with certainty? SDT

I just returned from the Louisville show where I learned that the R-14Ts are now available . Both Good Year and Titan had displays and Kubota had two or three models with R14s mounted. They look to be just the thing for those who cannot decide between R-1s and R-4s. SDT

Does anyone know the procedure to appeal the denial of a Kubota warranty claim? Issue is complicated and lengthy so will not try to explain details here but certainly something that Kubota would not deny if all of the details and the sequence of events were known by a person having the...

I'm helping a friend install a BX2763A snow plow on his BX2670. I've told him that he will need tire chains and plan to order these for him because I can get a better deal than he can. His tractor has F & R turf tires, 18x8.50-10 fronts and 26-12-12 rears. It also has a MMM. Today, I looked at...

This week I learned that, as predicted, the mechanically injected 1.5 L 4 cylinder engine used in the B3350, F series and high end ZTR mowers is being replaced with a common rail design. This should eliminate issues with regeneration just as Kubota has apparently resolved such. I've expected...

Anyone here frequent TBN? It seems that at least the Kubota TBN forums have just about dried up. Yes, I know that it appears to be down at the moment but that is another issue. SDT

It appears that Kubota has recently changed their policy regarding regen warranty claims. I will not go into details at this time but it appears that Kubota has decided that they are spending too much money for regen issues submitted during the warranty period, and is aggressively looking for...

Anyone know if adding a mid PTO to a GL6060 ROPS requires a split? Cannot seem to get a straight answer from my dealer. SDT

I would like to replace the steel cutting edge on my Kubota V 5060, 60" snow plow with a hard rubber or poly cutting edge . This plow is used on my Kubota RTVX-1100C. Kubota does not offer a rubber or poly cutting edge for this plow. The OEM edge is 1/4" flat steel 72" long X 6" wide and is...

Does anyone have any information on the new RC3712 HD 12' bat wing? I believe it is available for sale but do not find it on the LP website. SDT

Today I finally mounted the 5' cutter on the B3350 to try it out. (Love it!) As expected, I will need front weights to use it in all the places where I plan to do so. I have a complete set of 5 front weights and the front weight bracket for it (great CL find about a month ago) but have not...

New forum member here but longtime member elsewhere. I own a 2015 M9960 ROPS 12 speed, used exclusively for mowing. Currently, I use a HD 7' mounted cutter but plan to replace this cutter with a 12 or 15 foot BW cutter within the next year. My tractor has about 46 hours on the meter. Recently...