Search results

No oil film, no leaks, I personally changed the large suction hose even though it wasn't leaking and added better clamps to the other rubber hoses on the oil cooler and steering controller to check for air getting sucked in. I had Kubota change the steering controller-no change. I removed the...

I haven't seen a L3560 hst in person. It could possibly have the same problem also. I pulled up hydraulic diagrams on Messick's for the L3560 and it shows it is the same as the l4060 and all 60 series. My service literature in both the hard copy and the disk show the L3560 to have the ASSY...

I run flail mower myself, best mower ever. Many people have never seen one here in Arkansas. The auto feature will not kick in now unless you really bog it below 540 pto and it isn't near as abrupt.

The l3560hstc is different. My service literature both on cd and paper for my L4760hstc show's to be the same as the L3560hstc and they are different. The L4060hstc L4760Hstc L5460hstc and L6060hstc are all plumbed the same. Mine acted exactly as you described it, but would get even worse to...

I get what you are saying. By doing it this way I can see that the pump has to supply the extra fluid that was before returning from steering to the pump. And it has to increase the amount of oil returning through the cooler back to the tank by the same amount that was returning to pump. All...

No I did not contact Kubota. They would never let me talk to anyone higher up when I called.

I have had the same problem, I have been dealing with it for years. Mine is l4760 hydro- same hydraulics as yours. Had it to dealer many times and nothing has repaired it. I purchased the service manual to try and figure it out myself. The service manual is wrong. The hydraulics in it are for...

The best I can explain it is that the steel return line that goes to the top back of pump needs blocked off. There are 2 bolts that hold it to the top of the pump. Under the rectangle piece that the bolts go through is a round gasket. I put a thin flat piece of metal bigger than the opening...

I have had the same problem, I have been dealing with it for years. Mine is l4760 hydro- same hydraulics as yours. Had it to dealer many times and nothing has repaired it. I purchased the service manual to try and figure it out myself. The service manual is wrong. The hydraulics in it are...

I hate to bring up an old topic but I have now had steering cylinder replaced and still loosing steering after tractor heats up running pto mower after an hour as hydraulic oil comes up to operating temp. Has anyone got this repaired?

I have also had to lube that rubber boot that the steering shaft goes through. It will grab it and pull it loose from the cab. I also have a l4760hstc and have the same steering binding that hasn't been resolved. I would say it is normal but mine didn't do it when new and now after using it...

Thanks for the quick response. That is what my service tech and myself where thinking. It is still under warranty so I will get them to try one. We don't think it's the pump or section pulling in air because the fluid doesn't produce any bubbles in it.

Has anyone got this repaired? I have a grand l4760 hst acts exactly as described. As tractor gets to operating temperature steering keeps binding worse even more when going from reverse to forward and try to turn steering. If turn steering fast can get it to act up even when cold. Has been...