Search results

Also, still seems like the 3 cylinders close to the steering wheel make no sound difference when bleeding like the front two cylinders do when bleeding. Are these pumps that hard to bleed?

It sounded good when it took off. Thats whats confusing. Ive bled the lines 3 times today again and cant get it to turn over again. Seems like something simple in the equation is missing?

Wolfman, I appreciate all your help. Was able to get it timed on the FI3 mark thinking all the marks were equally distanced on the flywheel. Timing is on. Got it running on its own for about 10 seconds last night. Thinking it needs to be bled more at the injectors. I dont have a way to pump...

Ok, have this problem narrowed down and hoping for some help. When I time the fuel injection pump, it doesnt line up with where it should on the flywheel. I am about 2 cylinders away from my F1 mark. Its showing f3. Got new plugs so thought I would open injector pump and roll engine over one...

I noticed the front two cylinders are compressing and burning fuel. I swapped the 2nd from the front injector with the 3rd one hoping the problem would follow the injector. It did not. Still firing on front two cylinders and not the rear 3. Think I have air in the back 3 lines or possible it...

In addition, I pulled the injectors today and it looked like only 2 cylinders were firing. Im thinking either I didnt bleed the other 3 injectors all the way or compression issues?

Havent done compression test Injection pump was rebuilt Not sure if injectors were OEM or aftermarket. Ordered online

None of the glow plugs work and I am fairly certain all glow plugs are shot. Have ordered new glow plugs from Kubota. Hoping that helps. Yes injector lines have been loosened a few times. So close to starting now. Appreciate the replies

Did an engine swap due to hole in the block. Replaced fuel lines and filters, rebuilt fuel pump and new lift pump. New injectors installed as well. Think I have the fuel air bled. All I am getting is white smoke coming out. I believe the glow plugs do not work. Will this fire up without...