Search results

Update - I split the L225DT at the end of the transmission. The loader frame extends back and upward, blocking the differential from pulling straight back. But by leaving one large attachment bolt on each side of the bell housing, the loader stays on the tractor but can rotate, lowering the...

Yes its the same gear - the two-row gear with 20T and 26T shown as part 70 on Kubota' diagram 440000 (upper left - attached) I made the small .pdf in post #3 of this thread that shows just that gear and its shaft, collars, bearings etc. The range gears further inside appear to be ok. I split...

Glad you found the problem before it required a new gear. To be clear, your loose gear was part 17 ? (first of the three gears in the side gearbox?) My loose gear is part 70 inside the trans - the shaft is grooved and the needles are gone! - probably in the bottom of the case somewhere.

Wolfman - poking around on OTT and related links brought me to an older shop manual download that covers the L225DT. It has enough detail to confirm that by splitting the tractor between the transmission and the rear differential case the #67 shaft and #70 gear can accessed for replacement...

Thanks for the quick reply - the Kubota Parts Page 380000 you've posted above shows the three gears that are in the outside gear case, they are all fine. The gear that's loose is #70 inside the big gear case - it drives the outside case. Edit - The gear is shown on Parts Page 440000 in the...

Hi group - new OTT member here (long-timer at TBN, hopeless Kubota fan) Need some help with a neighbor's L225DT that makes gear noise in 4wd. Took off the side gearbox and found the idler gear inside the case is very loose on its shaft - like it's center bushing is missing. The gear is not...