Search results

Darned if I didn't do it again - working in a cramped space and backed into a tree in low range. You'd think I had time to watch but I had to watch the bucket and trench. But popped the yoke off again again.... Its time for a new cylinder. I looked up the part: 70050-00003 But my GOSH! $850 to...

And here is post 6. Just to be safe I always try to exceed minimum requirements. It almost always works except when the wife is involved. So here is the picture. Yeah, I slipped with the hand grinder and hit the hard chrome but it's still above the seal when retracted:

Thanks for that hint. Here is post 5 - hopefully replies count. I'll know in a moment.... (wink)

On the B219 loader you are correct. The yokes are welded directly to the ram. But for Lil Foot, the B670 backhoe is different. There is a definite rim and "hub" extending from the ram. The hub/extension is definitely undersized by a bit and not hard chromed like the ram. Boom and dipper...

I was filling in a trench with the loader when I backed into a tree. Oops - the darnest things happen in low range. The yoke on the boom cylinder broke loose from the ram. It looked like it had been welded before and whoever attempted the repair, they didn't get much penetration. Anyway, I have...

Thank you, sir, for the reply. Yes, reverse is growling but not like 2nd gear. And no problem or concern with PTO operation which I use a lot. So this will definitely be a winter time project. I hope I can coax it thru the work season.... And frankly, I should probably freshen up the...

Hi folks - my 1st post here: I've had the above referenced Kubota for many years. The hour meter was broken when I bought it so I have no idea how many hours are on it but its a bunch. I've been dreading the day but it has happened. The unit has always growled quite noisily in 2nd gear and...