Search results

I should have been more clear. I was wondering why Kubota had offset the pins that way...

One thing I'm curious about.. Why are the pins offset such that the bucket mounts higher when the QA bracket is in place than if the bucket were attached directly to the arms? I would have expected the bucket pins to be in line with the arm pins, either horizontally or even lower as though one...

I don't know if you'll see this. It's been a while since you posted. I plan to build mine very much like yours. 2 inner plates and 2 outer plates per side. Any construction details you'd care to share? Looks like you've got about 1/2" overlap between the plates. Also looks like you're...

Good Morning, Thanks for the detailed instructions "cleo101". I want a set of pallet forks but I don't want the clamp-on variety so I think I want to make a QA bracket. I actually called my local stealership and they quoted me $511 plus tax and freight to bring it in to their shop for a...

Further to my previous post, I'm narrowing in on my purchase. I seem to be down to two choices for the general workhorse tractor. (no mowing, no blowing) The dealer has a 2014 B2320HSD with LA304 and 34 hours for $14700 CAD (out the door). I've got the dealer as low as I think he's likely to...

Just to add to the above. One of my buddies has a B2400 and says he'd consider going in on the B2320 with me if the BH65 will mount to his B2400 but he has no idea whether it will... Theoretically, there's a chance I can negotiate down the B2320+BH65 and have buddy pickup the BH65 from me and...

I've had enough of playing with vintage tractors. I just want to get stuff done, I don't need another hobby. I presently have a small fleet of Simplicity/AllisChalmers tractors. One with a plow blade for light snow, another with a belly mount deck, and another that I switch between 52"...