Search results

  1. C

    Adding a universal loader attachment to kubota L2202-m

    Thanks guys for the information! I will look into more tonight and see what’s going to require the least amount of modification. One other question, the loader valve does have a pressure relief around 2200psi but I don’t see a port for running a return line. It should have a return line correct...
  2. C

    Adding a universal loader attachment to kubota L2202-m

    Also does anyone know the GPM of the hydraulic pump on this tractor? Loader attachment requires 11GPM. Thanks! Charles
  3. C

    Adding a universal loader attachment to kubota L2202-m

    The old lines were capped off and my tractor doesn’t have power steering but I’ll cap them back up now I know I’m barking up the wrong tree! Could you offer some advice on how to do it correctly? Attached are pictures with the supply line from pump circled. From what I’m gathering is I need to...
  4. C

    Adding a universal loader attachment to kubota L2202-m

    Thanks for the reply! Attached are a couple pictures. There were two hardlines hooked up to the ports where the new hoses are hooked up now. Those ran to a solenoid assembly which controlled a small cylinder that raised and lowered one side of a 3 point attachment I believe. I ripped that all...
  5. C

    Adding a universal loader attachment to kubota L2202-m

    Hi all, this is my first time posting on the forum and am looking to see if anyone has any insight on this. I have a grey market L2202-m 2 wheel drive tractor that I modified and bolted a TYM X25 loader attachment too, I’m trying to tap into the tractor pump/manifold for a pressure line and a...
Top Bottom