Search results

I finally broke down and bought a set of the Kubota rear 50lb weights. Kinda pricey at $116+ tax per side, and dealer told me this was last set at that price, new stock price went up. The pros of these to me are: easy to take on/off if I want to move them to the turf tires. Access to wheel bolts...

I got lucky then. County was milling shoulder of my road, so I asked if I could get load for my sons house and mine. No problem, we each got a 10 wheeler load of millings no charge. Last year I got 6 loads of good fill when they were digging up culverts on my road…

Gonna try putting old loader frame on, never even dawned on me but if it’s close to level, I’ll put the grapple on that frame and leave it on…

I got the whole loader assembly except for the saddle arms, forgot to ask about those,they weren’t sitting with old loader at dealer lot…

Here ya go- first is old bucket on new loader, second is old bucket on old frame. I’ll leave the new one off, no sense of getting it dirty 🤣🤣🤣

Well, after almost 2 months, the BX2380 is back home with a new complete loader/bucket/cutting edge. KTAC ended up totaling the loader out( after dealer tried to fix it by making holes in saddle arms bigger for “adjustment”). They did a “Substitute of collateral “ for my loan, and I paid $300...

Well, after unsuccessfully talking to someone on phone Saturday, went up there this morning. Advisor said KTAC will either “substitute collateral” it or total loader assembly. Either one they are saying I need to make up difference, I told advisor to total and I’m not going for the making up...

🤣🤣🤣🤣🤣- good one…. I may ask next time I call, depending on how long they say saddle arms will take to get. I also believe those aren’t gonna cure the issue. I still believe the SSQA plate is bent back slightly on left side that doesn’t allow the bucket to drop fully onto the plate on that side...

Sadly, loader is only a 1 yr warranty item😡… as far as KTAC and financing/cash- no idea. All I know is that you have to get a policy for term of loan and have total premium put into the loan. When I financed the 1870 back in 2016, I just paid the premium yearly. I’m just wondering if anything...

A little update.. decided to stop by dealer as they have had it almost a month now. SA tells me they sent estimate in for the saddle arms and are waiting to hear back from KTAC. Must be any dealer nowadays never gives customer a call with an update 🙄🙄🙄….also mentioned to look at slop in front...

Wishing the dealer would let me effing know wtf is going on with it, dropped it off 4/1. On the 14th I stopped by and they "just" got it into shop and were looking at the saddle arms. KTAC in the meantime has forwarded me a first and second request letter :mad: :mad: :mad: ....

There’s a little tit that goes into the u shaped notch - those must line up. Then once they line up, it’ll connect, then you turn it so it’ll stay connected

Welp, pushing a smaller downed tree into hedgerow last weekend of March I heard a good creak, the unevenness was a little more when I had it in my garage to do the oil/filter change, so I dropped off at dealer last Saturday(4/1). I haven't heard if they've found anything yet...forgot to get a...

Yeah, unless I wanted to buy 2 pioneer sets to mount grapple. I do have a couple places that make and sell hydraulic hoses, so they might have had correct ends(like what Summit sent) …

Yeah, after looking at Summits website and stopping by Tractor Supply, figured I’d have to order the Summit ones. I could’ve stopped by a hydraulic place on Friday, but stopped by dealer today. They had the flat face ones in stock, so I got a male and female one with adapters for around $89...

Hi folks! I was wondering if the hydraulic lines have to be bled after installing a third function kit(Summit)? With removing the one line then adding the 4 empty lines, will the lines just fill with fluid once you start tractor? Or is there a way to bleed air out? I haven't seen any of the...

Hi folks! I finally got around to installing the third function kit from Summit Hydraulics on my Kubota BX2380. In the kit from Summit I received ISO 7241-1 B series hydraulic couplers for the bulkhead mount to grapple. The Land Pride SGC0554 grapple I have has the flat face couplers on the...

Well, I tried a temporary solution. Measured both R14T rear tires to top of rim as they are on tractor. Left side was 19-1/8”, right side at 19”. 1/8” doesn’t seem like much difference. I let air out of left so both sides were same to top of rim( 19”). Bucket is level now. 22psi left, 28psi...

Is the PB the line I have circled?

video basically covered everything I've done. I've tried different different tires, I even swapped out the rear R4's that came on it at delivery for a different set. I've come to conclusion that no 2 tires are exactly the same, as ones I have now(R14T & turf) they are not equal circumference. I...