Search results

Your thinking the timing is off on one cyclinder???? Just remove a shim from under the pump will correct the problem????? Are you serious????????????????????????????????

Clean both positive and negative cable ends at battery, clean ground cable end where it bolts to tractor and positive cable end at starter. A good share of the time it is where ground cable is bolted to the tractor frame. Also check the fan belt tension.

The plug wire boot is very close to the original production design.

There is no such thing as a "Freeze plug" on an engine. What you are refering to are Core Plugs or Soft Plugs. Only function of this plug is to fill the holes used to remove sand from the casting process. They are not now or were ever designed to releive pressure from ice in the water jacket of...

If it has one it will be located in the bottom of the seat coushion or at the front left corner of seat hinge, then again it may not have one.

Check the voltage at your battery, if it is 12v then clean the battery cable ends. Clean both ends of each cable. Your ignition switch probably is fine, a BX sends voltage to the shutoff via a timed relay to shut off engine. Once the engine is started you need no power at all except to shut it off.

Yes, you should replace the boot.