Search results

If your tractor is a diesel, then it doesn't require electrical current to keep it running after it is started. If it is a gasoline engine, then the ignition system requires current to keep the engine running. If the electric current weren't sufficient, the engine would have stopped running...

Did you have insurance on the tractor? If so, did you put in a claim? If not, you will spend a significant amount of money or labor to restore the tractor to its original state. I used to repair flood-damaged cars, and many times, when there was silt in the water, we would perform a partial...

I remember that the truck that delivered the diapers was an electric-powered truck. I think that the batteries weighed more than the diapers. I don't remember them ever having headlights.

Our driveway, where it meets the road, has always had water washing down it, and it never did much damage. This year, the town road about 30' washed out along the edge of the road where it intersects with our driveway. The town came by and repaired the asphalt, but when they got to our...

When I fuel the tractor, I put the fuel cap on the seat, so if I forget to put it back on, it will be mighty uncomfortable to sit on it. Ever since I started doing this, I haven't misplaced the fuel cap.

Have you got a ballpark idea of the total cost of doing the rebuild versus the rebuilt engine? If it is close, I would go for the factory rebuild, and if you talk to them, they might take your old engine in as a core exchange and give you some $$$ for it towards the rebuilt engine.

No parts were available for my small Japanese alternator.

Vermont bacon producer provokes national chuckle for packaging humor teasing teachers https://www.burlingtonfreepress.com/story/news/local/vermont/2018/08/16/vt-bacon-goes-national-packaging-humor-jab-education-system/1006477002/

Saving the planet at the expense of the moose isn't a trade-off in my mind. You would think that all the environmental groups would have been raising hell with the legislature and governor over this foolishness.

If you have only owned it for 9 months, why not put in a warranty claim and let the selling dealer fix the problem? Every day you wait, your warranty is expiring, so get it fixed correctly now before you find out that it is going to need some expensive parts to get it running correctly in the...

I wonder if this will work with the BX23S, equipped with a Full Hard Cab, and the Land Pride 3rd function valve?

I bought a Land Pride rake, and it works very well for picking the small rocks out of the ground. Mine came with wheels, and the only thing that it doesn't have is the drop-down blade to smooth the surface as you rake the loose material. I have yet to price the parts to add it to my rake, and...

Suppose it is calcium chloride, a known corrosive product inside the tires. In that case, leave it as it is. Should the rim rust out, buying new, mounted tires and rims from a Kubota dealer will be less expensive than removing what is currently there and replacing it with the Rim Guard product...

I had a problem with the rear wheels on my BX22, where the tractor wouldn't move; the rims would spin in the center of the tires. I resolved the problem by laying the tires flat on the ground first on the rear, and using a tire bead breaker (manual labor), I got the bead down enough to sand the...

Check with the parts department for a cut-off date for the gearbox production change. Usually, where there is a serial number cut off, there is a date associated with the production change that affects the parts involved. You might find a stamped number on the case somewhere, so clean it well...

Bending it back in place isn't an option. I would remove it and place the pin in a large vise, and use whatever tool you have that can grab the upper part of the wheel and bend it till it is straight. Without knowing exactly where it is bent is the problematic part. Most likely, it is the...

If it were mine, I would create an inventory list of parts needed to rebuild the engine, including tools that you don't presently have and all the associated costs. Then, get a quote from the machine shop regarding the cost of their work. Add all those costs up and then subtract that number...

After watching the video, think about the question: Will heating the metal around the pin cause it to expand and tighten the fit of the pin, or will it loosen the fit?

Who is the builder of this deck? Is it being done on a budget?

I found a drive-over mower deck that came with a 2370 tractor, and the seller said that he doesn't use it and wants to sell it. Are the mounting hardware and the mower deck the same on the Series 70 as they are for the Series 80 drive-over mower decks? The deck is part number RCK54D26BX. The...