Search results

Well I stiffened up my press bed by using a forklift upright that I cut off. That went under the block. Then I used another forklift piece on top of the liner and started the work.

:eek::eek::eek: STOP PUSHING THAT BUTTON................... it keeps turning my high beams on and off:D:D:D:D:D

Don't have the new ones in yet. Had a lot of other things to tend to this week. I should get them in this weekend. I was looking at the pistons and the liners just out of the box and the piston will not even get close to fitting in the liner. That tells me that it will have to be cut but I will...

As I understand gears from setting up backlash on them from dragging plows to drag racing this spec is pretty standard to the technology. In other words backlash does not vary much with gears regardless of the application. I would think of the difference of your .010 and the spec, as wear. You...

I am happy to announce that my fears of burning through the liner with the welder are false.:D And my interpretation of coolant leaking behind the liners is wrong.:D It is about time I had some good luck:cool: I got the liners out using a sawzall blade. Cut through the liner until it was very...

That is exactly what I was thinking too.;) I didn't have a reverser on my B6000 which was another reason I sold it. Three speeds in reverse:rolleyes:

I see that Wengers shows a listing for that head too. Theirs was a reman though. :( I don't think I would go reman because this sytem is to vulnerable to this problem. A B6000 I had broke a reman head the second time in it's life so that makes me think against the idea that reman is...

Yes they sure do have my block.:D:D:D http://www.wengers.com/ There is hope for my tractor now. Thanks

Diesel Injection Service is the answer!!!:D Weather you ship your stuff to ATL, GA or other locations the pump is remanned for $200. They completely did my nozzles for $45 each with new springs, tips and needles, set pop pressure and spray pattern etc. Definately a less expensive option. My...

I guess to be more specific I should say that my cyl head had two cracks in each firing chamber. It was obviously overheated before I got it because I am very meticulous with my stuff (ok I'm anal:D) After we rode a hay ride one year using this tractor it started going down hill quite...

You should not have less than 10 psi cap.

Ask and ye shall recieve;) http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=380108009921&viewitem=&sspagename=STRK%3AMEWAX%3AIT I already have one coming. Should be here any day now. My head broke twice in both cylinders :eek::eek::eek: Oh ......................... he will take an offer...

Since I'm in the south I guess it would be the red-neck way:p:D:D:D:D Now I'm using a hack saw blade to cut the liner loose. Out of round could be the least of my worries. Water ran out of the bottom of both liners so the parent bore must be cracked.:mad::mad: I'll know pretty soon as this...

I just broke my L175 apart and the engine is sitting on the bench. Not to bad really. First pull the hood off. Unbolt the mounting bracket that holds the hood and just lift the hood with the bracket away from the tractor. Then take out the battery and remove the bolts from the mount that holds...

:confused::confused::confused: So............ nobody here has done this I guess.:confused: Today is engine day so I am going to be working at it all day long.

Ok, need info. I need to get the liners out of my engine. These are dry liners in this Z750 two cyl. I started out burning four weld lines down the length of the liner trying to shrink it and then just bump it out:eek::eek: no luck. Now I'm affraid that I might have burned through one of the...

Shaft failure to the belly mower?

How pathetic:mad: Bad service:mad: Service before and after the sale is what makes things happen. I wouldn't buy anything from a place that can't give good service. Times like we are in now will have a make or break effect on places like this. I know one that is no longer in business here in...