Search results

Does anyone know if the rear wheels from a B7200 will fit a B6000. from the pics I've seen they use the same sort of slide on axle hub fitting, but is the shaft the same size as size as the B6000 shaft. what is the stud pcd spacing and pilot hole sizes aswell. I'm pushed for time on this one...

yep, sure did see them, and would you believe it, they are mine which i've listed as they are not the right size for my B6000.:confused: Which is why i put this whole subject of rim changes up ;);) thgansk for the reply though. rob

I have seen a spare motor which im thinking maybe a good spare for my B6000. It is marked as a Z600, anyone know if this is the correct unit or not. cheers rob

thanks for the update, I have prior to seeing your update spoken to kubota UK (parts dept) to try and clarify things. it appears that the original hub has been superceded by part number 66621-17151 and it is a modified part from what the guy said, but it still has the original 90/120 mm...

Re:HELP! Wheel fitting spec, there's an error somewhere... Well then, just been out into the cold and snow to mmeasure these bits again. there is no way that the rear wheel and hub stud/pilot hole sizes are "standard" ob B5000/6/7 etc, or 1410/1610 etc I've checked 3 set of wheels and they...

any of you guys out there happen to know the rear axle half shaft dimension are.(Hex section the hub slides on to), is it 4.5" or larger. also does it have a specific hub for it or is it generic to several models. thanks in advance rob

hi all, still on this wheel issue, there seems to be an error in the specs somewhere on this subject. I have have seen two conflicting pieces of info. can anyone clear it up and confirm the correct version please. this is what i've seen in the last few days. pilot hole is 90mm bolt pcd is...

still on this subject guys and its doing my head in to be honest. having now aquired the rear rims as in my post above i've now discovered this info. Link: http://en.yenibiz.com/achat/produit_details.php?id=17 now as prev mention i allready have a set of 12" front rims with a new pair of these...

hi all here's an update on my searches for suitable combinations. i've discovered that the rear wheels from a B1410/1610 will work as they have the correct pilot hole and bolt spacing etc, they are a 8" rim aswell so not overly to wide to sap all the B6000's power. I saw them on ebay , made...

Hi all, I found a source of PTO reversers for my B6000 , my question to you all is simple really, are they any use, and are they real value for money. I,ve found them for 595.00 euro's, or for us in the uk £585.00 this does seem a bit steep for what you are getting , they are new, but still ...

working on the info supplied then, will these wheels fit as the rears on my B6000 . i suspect that slightly wider tyres will fit anyway maybe upto 8.00 wide. they are on ebay so here is the link...

thats great ed, can you expand on how the 3 line system functions and what i would require , my grey cells are not what they used to be:confused:;) thanks again rob

hi all, thanks for all the replies so far to my other question, so i thought i run this by you all for some feedback. I want to use a tipping trailer with my B6000 but its not piped for one, what is the best way to do this and what will be required , i suspect that if the trailers hyrdo...

thanks for all that info guys, its slowly sunk in;)... But another problem has reared its head, wheels or should that be, lack off them. Having established what tyres sizes are required and that I have a B6000DT machine , I'm still running the wrong size wheels with my agri tyre setup. 12 x6 on...

thanks for that Ed, looks like I'll be needing the 20 x800-10 and 27 X 850-15 then for my application. problem now is that i'll be different wheels again for those size tyres. do you know of any other kubota or similar wheels that will work. thanks rob

ths for the info, all these sizes does my head in:eek: , i probably get there in the end;) might take years to work it all though:( rob

many thanks for the replies guys, so its all in the tyre size in this case then as both sets of wheels are the same, 12" &14" . What is the best way to go then, I dont want to use the agri tyres at the moment as it will chew up my lawns at this time of year so turf of similar is needed. Should i...

Hi can any assist with a wheel/tyre size problem I'm having with my B6000. The tractor came with agri tyres , Fr 5x12 and RR 7x14 but i also aquired a second set of wheels with new bridgestone "farm service " tyres, size are: FR 6x12 and RR 7x14 , but they look odd to be honest and the tractor...

thanks for the warm welcome guys. I'll upload some decent pics shortly but in the meantime here is one that shows the engine and fuel tank arrangement, the throttle rod can been seen running hoizontally from just below the dash/bulkhead to the engine just above the exhaust etc. it only has a...

Greeting all I recently purchased a nice B6000 to replace an ageing wheelhorse tractor that has been well and truly wornout;) now. I found this site by luck today whilst searching for info on the B6000 tractor, and by all account, this seems to be an excellent source of info and help. A few...