Search results

Sorry for the delayed response but i don't get a lot of free time. Our GR2120 began loosing fluid and the issue was a poorly placed/routed breather that had fallen and consequently was dispensing hydro fluid. It is located in the LR upper corner. remove the rear cover and it's easy to find...

Woodmaxx is running a pretty good sale. Just bought a WM-8H with free shipping for less than used ones are selling foro_O👍👍👍 ( have to place order online for the free shipping) 🍻🍻🍻

I want to thank all that responded and give an update. I went with the Woodmaxx WM-8H. And for any one looking for one, they are running a 30% 😳 off sale and 🤫🤫PSSST! free shipping If YOU ORDER ONLINE. Lots of other things on sale as well 🍻🍻 And Tom, I just looked at your Salsco unit...

I received a lot of valuable input on my previous post and want to again thank ALL that replied (y) With that being said I'm wondering if there is more input from others that have bought /used them. My need is not regular but I do have a number of trees that have grown to 70ft or more and I'm...

thank you for your input (y)

Mapleleaf Farmer and all else that responded, :ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO: (y) Thank you all very much, kind of what I suspected. I'm going to cross post this to tractornbynet just too see if their are any other comments. Below is the response I received from them on an...

You are correct, but their website wording / claims on the unit would seem to indicate they are which is why I'm asking for info. Canadian Made flywheel and input gears, Blades: 2-Reversible USA Made, 1 Bed Knife (Anvil) USA Made. Just looking for real experience with them good or bad. Can't...

I'm in the market for a woodchipper and ran across these guys on sleaze bay. They have a machine somewhat similar to a Woodmaxx WM-8H which from my hours of research seems to be the top dog for my needs and compatibility with my B3200 (23 PTO HP) They claim to have been in business 20 years...

looking to buy a Woodmax WM-8h with low hours and well kept condition. Closerr to Omaha the better or fastenal shipping would be preferred. may be able to meet halfway if not more that 250 miles one way (500 total) Thanks

Quite impressive as is your photography and collection of quotes 👍🏻

thank you for taking the time to do so. According to my research (limited) it fits a Daihatsu Cuore IV (1995, 1996, 1997, 1998, ) Not sure that model was available here but I'm pretty sure there are other applications or similar units. I applaud you ingenuity and compliment you on sharing the...

But mine's better nah nah nah nah nah nah 😁 cause it's rated for 120 amps 🎆LOL 🤣 But I'll bet yours was A LOT cheaper 😥. Mine was 130.00 at the time now 165.00 (Ouch!!!). Yours was ? And the part number would be very helpful for others as well :) TWO questions, and these are serious ones...

Sorry for the delayed response :( Quite well, In fact I typically only use the small heater with a coat on, if the sun is out I really don't need the coat depending on how long I'm out there. This is in 10 degree temps.

that is where i failed, not doing a load test (SPANK) :( but I've just never had a battery fail like that.. Good luck in your quest 🍻

I had a similar thing happen on a GR2120. jumped off to move a branch, forgot to disengage the deck so the engine shut off. No biggy (or so i thought). Jumped back on disengaged the deck. key on, all lights etc. not start, no nada???? towed it up to the shop, got out the manual and proceeded...

While doing a 400 hour service on one of my units I found the Mower deck gear box breather plugged and the unit was just beginning to push some fluid out. I found no mention of this in the service manual or maintenance schedule(n). While researching some other topic on the deck maintenance a...

Having owned several b series tractors with belly mowers it was always a struggle to DRAG the mower out from under the tractor. This due to the center rear wheels being stationary. I discovered a quick and cheap solution. harbor freight sells a small 18 x12 dolly for 13.00 ( 9.99 on sale) that...

Thank you for your response 🍺 having spent 25 or so years in engineering and another 20+ owning a classic car resto / repair shop, Everything you said is true and may help others as well

I did consider the water route but couldn't think of a way to do it cleanly and where to place the heater without hacking up the cover below the instrument panel. Once the cab / cover is in place there's not a lot of room unless you go overhead. Then hoses and routing were another dilemma. I...