Search results

thx.... this has helped and prevented a mistake.

I want to get a front mounted mid-chassis snowblower for my new to me B9200. I know of a New Holland that was formerly mounted on the front of a NH Boomer 33. Will the NH work for me?

thx wolfman

good suggestion on the water in the fuel. also the bubble are around the base of the injector not in the fuel line spray pattern is poor on 1 injector... i will re-torque all head bolts as i will have to have the valve cover off to check valves... oh no... valve cover gasket is going to be...

Fuel filter seems OK... but I will double check... I really only tried to re-torque the new head bolt, and one of the neighboring bolts. What would cause the head to break off a head bolt? I did not check valve clearance.. I'll look today.. something may be causing compression loss...

Hi all, I have a B7100 with a D750 A few weeks ago i noticed a head bolt had actually broken the head off of the bolt. I bled the injector lines and some of the diesel pooled around the base of the injectors, and while it was there and the engine running, there were bubbles around each...

these are WAY PAST expansion pins.. holes are wallowed out say additional 1/4 inch in diameter. ugggggllllyyyy! i should take pics and post.. i may run a weld over the entire hole in the bucket, and re-drill.. it has been suggested I try Bomaweld No. 25125 5/32 for mild steel. 7018...

I need to re-build the arms and the bucket pivot pins B7100. What is the cheapest solution. I just need it to work a while longer. can i use 3/4 inch pins with 3/4 inch hardened washers welded to the shoes?

It was a thrust bushing on the end of the 4x4 transmission shaft. also there is a metal pin that goes in that groove... the tractor is all back together and the transmission is great.. thx all...

I am going to the kubota dealer with the part in hand. I too believe it is a thrust collar and I have to be certain. Tractor has been apart for 7 months now. Wish I could remember. ...

Re-assembled after split and Trans rebuild. I have a part left over. Looks like a spacer the diameter of the input shaft with indentations 180 apart. I'm trying to find a way to post a pic from my iPhone.

I have a printout of that exploded diagram. I will continue to look for a place on that shaft.

Just had the trans gone thru on B7100D, 4WD standard drive, and I am in the process of putting the Diff and Trans back together. there is a metal shim/thrust washer that came out as I split the assembly 3 months ago. I am now putting it back together and I don't see how or where this 2 inch...