Search results

I opened the loom on the harness and looked everywhere possible but no power supply plug. It's running like a charm again as usual since 2016, no power problem so all is good. Just going with the filter change and happily tractor on. Thanks

It is clearly a fuel pump but don't know why it was supplied on the machine without a plug on the harness to power it. Tractor is again running well with out. To be clear The tractor works very well. Just curious if it is a common thing to have the pump supplied without power provision.

Having fuel problems. losing RPM and stalling. I will need to replace filters for sure. My inquiry is when it comes to the fuel pump. 2017 BX25D has two fuel filters, one near the tank and one just before injector pump, the fuel pump is just after the fuel tank filter. While this was factory...

I have the alternator of the machine and will take to the local shop to be checked tomorrow. your tips are informative, thanks

Yes, charge light and all other panel lights flash on prior to start then go out as normal operation. As mentioned the tach needle and hour meter also cycle through normal key on check. All fuses checked good visually and by ohms test at 0 resistance.

Ok. No dc volts measured at #6 pin. Also battery gives 12.2 volts running or off. maybe should take that alternator back.

2016 bx25d. alternator failed, battery died, tach and hour meter stopped working. Replaced alternator with new but tach and hour meter did not come back to operation. Turning key to on the tach needle goes to full and back to 0 as normal hour meter and other cluster indicators all do normal...