Search results

If you have a voltmeter try to hook it up so you can see the volts while cranking. If the volts drops off it's your battery. Classic sign of a dead cell.

You got a radiator pressure tester?

Can you tell us what states those are?

Just go after it with your FEL. If you mess up you can fix it. It's just dirt. With practice you'll become confident. I've become fairly decent dumping with the front of the bucket low to the ground going forward so it smooths the dirt as I'm moving. Then back drag in float with the bucket...

Don't sweat it. Your'e fine either way.

Vice grips

My kit from summit is still in the box. I need to get to it.

Are the tires OEM size? If not maybe the size ratio is off? The back tires can wore down and change the ratio. On my L45 I can shift on the fly(well, shift on the crawl) no resistance.

You can get tricky and cross the trench you just dug.

I lived in NW Florida for 30yrs. Only used tap water, depending on where you're at you might be okay. Florida has some pretty good water. Here in SE NM we got extremely hard water. We have to use vinegar to keep our faucets clean. I started using distilled here. There is an additive for cooling...

My 2 cents. Put your meter on the battery posts while the tractor is running, should be around 14VDC. If not check the battery leads and see what you get, again, should be +/-14VDC. If not check the charging charging wire on the alternator, should be +/-14. The reason I say check the voltage on...

I guess it depends on how the tractor is setup. For me it's easier to lock the rear rather than bring my left foot over to the brakes. I still need my right foot for the go pedal.

Four OEM filters for my L45 bought last year. The three hydro filters were made in China, the oil filter was made in Indoniesia. Filters for my RTV were made in Mexico.

Are you talking about your wife or the tractor? Yeah, sometimes manuals are not much help. You just have to get in there and figure it out. Which you did. Better than taking it to the dealer.

PM sent. Thanks

I got the cheap ones. To make them work pretty well clean the surface really good with something that leaves no residue, I used rubbing alcohol. Take a heat gun, blow dryer, or even a small torch and warm up the spot you want to stick it to then stick it. Warm up the little tab. By warm I mean...

When I brought up OTT the other night I honestly have no idea how I got logged in. I tried a couple of passwords I thought it might be and got an incorrect password message. Then all of a sudden I'm on. The last time I was on OTT was two computers ago and I was using a windows OS. I'm now using...

I like the triple wrap baling wire keeping the radiator away from the fan. I agree with torch. How's the exhaust? Blue smoke?

I'm guilty of not keeping my email current, I haven't logged in for quite a while. I didn't (knowingly) try to open a new account. I would like to keep my username. This place was only a couple of years old when I first registered. Thanks to the guys that tried to help with the passwords but...