Search results

Thanks Dan. I'm wondering how I can hang the FEL and cycle all the cylinders with it on the ground. I guess I can jack it up and install it without the use of the hydraulics and at least get under it and make the connections.

I am presently swapping my BF 300A FEL from my B8200 onto my B8200 HST. All the sub frame has been installed but prior to the install I would like to purge the FEL of old contaminated fluid before introducing it to the HST. What is the preferred method to drain the old fluid? The B8200 HST only...

Sorry for the late reply. It is the 60 inch to fit a B8200 (RC60-82H) I think it will fit a B7200 as well

Thanks Wolfman. The older B8200 had a Bradco 8LD on the back and I don't know how custom the under carriage was. The B8200 HST seems to have all the appropriate holes to carry the BF300A

Hi. I am taking my B8200 manual and swapping my loader and Back hoe frame including all hydraulics to my recently acquired B8200 HST that had been used only for mowing. Should I expect any surprises or will everything be fairly straight forward?. Will the mid PTO have to be abandoned on the HST...

I purchased a second B8200 that came with the belly mower and I don't need it. It is in decent shape with a new belt but missing the covers. I will include all hardware. $600 . I am in Georgian Bay area of Ontario, Canada https://photos.app.goo.gl/SaR5ma6zFrkUhYvC6

I had wondered about doing that with the bucket on my BX 23 to dig out a couple of dwarf Alberta spruce. So it is possible then?

Yeah, my apologies on the $1,300 Canadian. The price is $1,400 +. I was looking at one at my dealer in Barrie ontario and the lower price was a limited offer. They do show a US dealership in Tonowanda ,New York.

Here is the link to Norwood Sawmills https://www.norwoodsawmills.com/en_ca/

Norwood in Canada makes a really slick log skidding winch that is hydraulic. It is built onto a three point hitch frame with chain hooks and drop down spuds that dig in and resist the pull. The hydraulic capstan takes a few wraps of 5/8" nylon rope and with just a pull of the hand you can...

Thanks Wolfman. I don't quite understand about the length difference in the HST B8200. Is it a different wheel base? I thought the tractor data specs showed no difference in the 2wd/4wd/HST/non HST. Without hydraulics of a loader and hoe would the pump be the same size and location. I haven't...

Hey guys. I had a catastrophic break down of my front axle on my B8200 non hydrostat and after much searching and disappointment I have secured a B8200 HST as a donor tractor. The former has a front end loader and a Bradco 8LD back hoe with the frame undercarriage. The HST has a belly mower and...

I am in need of an entire front unit as mine is in total need of a rebuild including ring and pinion gear assemble and most bearings and seals. Anyone have any ideas where I could find one? I would even consider buying a complete tractor for parts.

I am rebuilding my front axle and am having trouble separating the front axle arm from the Bevel gear case. Does anyone have a solution that doesn't involve wailing on it?

Thanks Wolfman. I would really like to get a WSM and will try to get one from my dealer. It's a long weekend here so I am stalled at the moment. I need the "O"ring for the diff case halves as it got stretched as I soaked it in diesel. The bearing bits in the diff were the two bearings for the...

Thanks Wolf. I got the axle apart and the bearing from the right axle was in pieces in the diff. The pinion gear at the front u joint was flopping around in it's case and I got all new bearings for that piece. My big concern is the shims 22,23,24 on the drawings were not shipped. How do I tell...

I was working with my B8200 on my island building project and suffered a catastrophic breakdown with my front universal. It exploded and came off the spline. The joint case was ripped to pieces and the universal is in two pieces. The front piece is still attached to the shape but the shaft is...

Hi. I am new to this forum although no stranger to it. I have recently purchased BX23S and I am considering buying a Bolens 48" 3pt. hitch snow blower. It's not pretty but the price is right and it is in good repair including a hydraulic chute. My question is this.Is this blower in need of more...