Search results

I got the 12V conversion done. I had the original 6V generator rebuilt and converted to 12V then I replaced the voltage regulator with a matched 12V one. I have the original hydraulics for it. I am rebuilding that now. I am going to put rear remotes on it. A friend picked up the body panels to...

GoeHorn those are some nice show tractors! I would be afraid to go into the woods and pull a log with those! I am restoring mine to what I call first class working order. Mine was 6 volt positive ground. You can’t jump it. A winch would be very expensive and you are limited to what lighting you...

I believe those are from around the 1930’s. Do you have any pictures? My great uncle had a model W 12-20. Those came out in 1918 and sold for $1385. I have the book for it and the radiator. Dad said it was wore out when he bought it. Dad remembers playing on it when he was a kid.

Thanks guys! Dad let me start driving it when I was 10. By the time I was 12 I was plowing the garden and bush hogging by myself. It has a 4 cylinder Hercules motor. Anderson made an after market 3 point hitch for it. It was braced off of the transmission case and we continually broke bolts...

It’s my 1951 Oliver Crawler HG-68. My family bought this brand new in 51. I am in the process of restoring it to first class working order. Not show quality. I have rebuilt the motor. Years ago I converted it to a distributor system. I have just converted from 6V positive ground to 12V negative...

Nice trailer! I don’t see any prices on there website, unless I am over looking it. I guess you have to call

Yes you will need a ballast. I made mine. I used a plastic 30 gal drum. Cut the top off and run a hitch bar through the center and a center link hook on top. hooked them together with some rebar and filled it with concrete. It weighs about 450lbs. It works real good! Very necessary when I use...

I used 2 lawn tractors for 20 years with bar tread rear tires to contend with hills on my 20 acres. We mow about 3ac of it. I had transaxle trouble with both. I was shopping for a new one and everyone was telling me I cannot use bar tread with hydrostat because I will take out the transmission...

Thanks! I searched everything and this place would not come up. i installed a 3rd valve for a grapple. But my 3 point hitch gets used the most. I am considering running a second set of hoses to that valve to run the tilt cylinder when not using the grapple. Then in time I may put the rear valves...

Yep I called them this morning. That is one thing they do not have. I bought my 3rd function for my BX2380 from them. They are real good to work with.

Thinking about adding T&T and rear remotes to my Ford 1720. Where is a good place to source a tilt cylinder? I am able to do some fabrication if needed. Ron

i have had my box blade about 5 years now. I am looking hard at installing T&T on my Ford 1720. Guaranteed it’s more expensive now. Where did you get your parts to do it? Trying to figure out where to start. I just installed the WR Long 3rd function for a grapple. Ron

Not for me. The coupler i ordered was the same price with Amazon. I get it in 2 days free shipping. 2 day shipping direct from lock and lube was $8.03.

I checked out a youtube tube and then tried it on the 48” blade on my ATV setup. I cut the PVC 1” longer than my blade then cut the slot with a table saw. It worked great! It solved the problem of digging into the gravel. I was skeptical about if it would stay on or not. No problems at all. I...

My local Kubota dealer was also a New Holland dealer for many years. My Ford was purchased new there. They recommended just what you mentioned. They said to use regular UDT in my Ford with a gear transmission. They said the two will work together just fine and the mixing will be very minimal...

My Ford 1720 and my Kubota 2380 use different hydraulic fluids. One is a gear transmission and one is a hydrostatic transmission. Will I contaminate one fluid with the other? Is there a way to flush the grapple? Or is this even an issue? Ron

The 170 is my favorite little saw. I am going to buy another one before 6/30/19. They are on sale for $159 till then. My son-in-law helps me some and two little saws will be real handy!

My new BX2380 is the first HST tractor I have owned. I won’t buy another gear drive. I bought it with SSQA. My Ford 1720 is gear drive. No more than I use it and the fact it is very low hours I don’t see the need to trade up. I may go ahead and spend the $1800 and add a WR Long 3rd valve kit...

https://www.everythingattachments.com/Tractor-Loader-Universal-Skid-Steer-Quick-Attach-Hitch-s/1869.htm

I just purchased a BX2380 w/ 54” mmm, Swift-tach loader with a quick attach bucket, full tank of fuel, 2 tee shirts, 2 hats :D out the door for $15,000. I order the land pride 3rd valve kit from Messicks for $780. Installed that myself. I have a grapple ordered from EA.