Search results

Taking to the dealer on Monday. Will report back with findings as to possibly help someone else in the future. Sent from my SM-N900V using Tapatalk

Thanks wolfman... all this is past my pay grade. Taking to dealer on Monday. Will report back with findings to possibly help someone else in future. .. Sent from my SM-N900V using Tapatalk

I noticed immediately...and took out the shims...also, I wouldn't think that would have anything to do with the arms simply releasing down. No pump required I would think...thx Sent from my SM-N900V using Tapatalk

No go, still won't go back down... Sent from my SM-N900V using Tapatalk

Going to give it a try will post back with results. Thanks Sent from my SM-N900V using Tapatalk

Sometime during the process of shimming my hydraulic pressure relief valve I managed to screw something up with my three point arms. They appear to be in the max up position at the arms. My control lever does nothing to move them. When I pull the three point lever about 80% up I can hear them...

Well, here is the inside of the relief valve housing. I backed out the large hex head on the right to get at the relief valve. There was a small spring that was in an indentation on the back side of the hex head and a bullet shaped circular piece of metal that also had an indentation on it...

So I believe I finally found where the adjustment needs to be made. I went to kubota's very user-friendly website. The purple areas highlighted I believe is where I need to add shims. I guess now my question is has anyone actually done this, and when I open up that cover what am I going to...

So I installed my pressure valve. I am getting a very consistent 1400 PSI when maxed out and all positions and at every RPM. I still cannot find the pressure relief valve area. I have one dealer telling me it is in the controls for the loader. I have another dealer telling me it is in the rear...

Two hoses on the bottom 4 hoses on the side Sent from my SM-N900V using Tapatalk

On the side that has two hoses there it is a stamp in the head above each hose. One stamp above one hose reads in one stamp above the other reads out. Sent from my SM-N900V using Tapatalk

Correction this is a view from the bottom of my controls. There is only an in and an in-and-out. Sent from my SM-N900V using Tapatalk

There are three hoses on the bottom of my controls in addition to the other 4. With that said what will the relief valve look like? Am I looking for an allen head screw inside of a nut? When I get home tonight I will try to post a pictures from different angles. Also, I just looked at my...

Re: B700 HST 1986 Model year help Sent from my SM-N900V using Tapatalk

Re: B700 HST 1986 Model year help Sent from my SM-N900V using Tapatalk

I recently added 100 pound forklifts to my loader bucket. I was attempting to lift a crate with a 250 pound rototiller on it. I could only lift the crate to about chest height when my Hydraulics appeared to be maxed out. I have a Woods loader bucket that per Woods can lift 500 pounds to full...

Great, thx everyone... Sent from my SM-N900V using Tapatalk

Great info, thx guys... Sent from my SM-N900V using Tapatalk

Yes, there was a hardened rubber substance...thx Sent from my SM-N900V using Tapatalk

I removed the tiller seal and bearing from my B40C tiller yesterday. What if anything should I put between the metal parts when I replace them. I sanded them smooth already. The dealer recommended a bead of silicone??? Any other tips? Thank you in advance.