Search results

Thanks a lot!

How exactly would I do this. Is there a universal kit? Thanks a lot for any info. I would definitely be interested in this.

Thanks! That’s what i was thinking but all I could find info about was the suction filter behind your left foot rest. I’m guessing you remove the screws at the bottom of it and the filter comes out?

Can someone tell me what part this is on my kubota L285. It***8217;s part of the Hydraulic system. I didn***8217;t know if it***8217;s a filter etc. It has a label explaining cleaning instructions but most of the writing is worn off. (Sorry, pics are rotated 90 degrees)

That’s a lot of good info. Thanks a lot for posting!

The alternator is not charging on my L285. I tested the voltage and it was saying 12.5 V so I assume the alternator was bad. I bought a new alternator and put it on and still the exact same voltage that the battery is putting out. Would the problem be my voltage regulator? If so, is there a way...

What is the best oil weight for my L285. I live in the southeast and we have summers in the high 90s and winters in the 20s. thanks in advance

Never mind. I found one. Thanks for the help Sent from my iPhone using Tapatalk

That's what I'm looking for. Does anybody have an idea where I can find one. I've looked on eBay but I cannot find that exact g.p. Indicator Sent from my iPhone using Tapatalk

I am wanting to buy a new glow plug indicator and I cannot figure out which one is the right one for my l285. Ive seen 25 amp and 20 amp. Does anyone know the right amp or the part number for the right one? Thanks for the help

I just ordered a magnetic drive tachometer and I noticed it didn't have a magnet with it. Will any magnet work or does it have to be a really strong magnet etc. Also the magnetic sensor unit has a red wire and a black wire. The paper with it said that the red wire should go to the tach so im...

Thanks for the help. Could you maybe go into a little more detail on where and how the sending unit would mount and any other information. I've never used one of these tachs. Thanks again

I have a l285 with a 4 cylinder and the tach drive unit is shot and I found a tach drive unit that is for a b2400 or other 3 cylinder engines. It looks the same other than it mounts with 2 holes and not 4 holes but looks like the two holes and in the same place as the stock tach drive. Would...

Thanks a lot for the links and sorry I just saw that it was at the top of the page.

thanks for the help. Do you have a link for the parts schematics by any chance?

Thanks for the help. I will take look at some older post.

Ok I just realized that the cable was broken off into the tach drive assembly that bolts to the motor. After getting it out I realized that when you spin the metal shaft that hooks into the slot in the motor, the other slot you can see on the other side that the cable locks into doesn't turn...

Yes I am talking about the part that bolts to the motor. When the tractor is running the part that bolts to the motor does not spin. Is there a way to repair this part. It seems to be a sealed part that cannot be taken apart.

I'm trying to trouble shoot my tach issue on my L285. The tach cable does not spin so I took it off and looked at the tach drive assemble and noticed that it looks like a spring that goes into the tach cable. Would the piece of metal that goes into the tach cable suppose to spin? I do not see a...

thanks a lot for the help and the advise.