Search results

What I want to know is who gave these credit agencies the permission to collect our personal information, I never agreed to it and yet somehow they control many facets of our life. I froze my information at all 3 of the major credit reporting agencies, when I want something I pay cash or I get...

You need to determine/measure your wheel bolt pattern and center hub diameter, you can then search farm implement wheels and find a wheel at a much lower price than buying a new Kubota wheel. Google search farm implement wheels once you have determined what your lug pattern is

The B2601 has a 19.5HP rear PTO rating, The available mid mower deck on the B2601 was a 54" and 60", In my opinion a 72" rear finish mower is at the very top end of the limit for the available PTO HP. With a 54" or 60" rear finish mower you would probably be able to cut the same amount of...

Tractor Data is showing front ag tires for your tractor to be 6-14(not 6.00-14 which is different) My opinion is that in a 24" height tire a 1" increase in height may cause problems Circumference(rolling length) = 2Pie x R 24" height tire = 12" radius x 3.14x2=75.36" rolling length 25" height...

You need to measure your bolt pattern and center hub diameter and research wheels that way, When I needed new rear wheels for my B7500 I found what I needed by searching farm implement wheels which were a lot less expensive than purchasing them from Kubota, Your tractors weight and load capacity...

If it is a B5200E the E would suggest that it is a 2wd model which means you can use a wider range of wheel and tire sizes because you do not need to have an exact match for height, You are going to need to measure the lug bolt pattern and center hole diameter and look for wheels that have the...

If you are going to go with turf tires I would look for a 15" 16" or 17" rim because that will give you the widest range of choice for tires for the rear, You indicate the machine is not 4wd so if the rear tires are slightly smaller or larger diameter it will not matter, with a 15" or 16" rim...

Rim Guard makes the claim that it is non corrosive but it contains sugar which is in fact corrosive to steel and anyone doing a bit of research can find this information, Yes sugar is not as corrosive as salt but it is corrosive, In fact air is corrosive to steel because it contains oxygen...

I priced 3 PTO generators and decided that it saved me money by using the portable generator I currently have and simply moving it around on the 3 point hitch Tractor Supply Carry All, I have a wood pallet that fits on the carry all and my generator sits on the pallet, I can leave it on the...

Grooving: V groove versus Parallel groove. A V groove will expel material from the groove better than a groove with Parallel sides, The square or rounded bottom parallel groove looks nicer but the V groove works better when it comes to expelling material from the groove, If you look at most ag...

When I replaced the rear tires on my B7500HST I priced the Good Year clover tread turf tires that were originally on it, They were 33 x 12.50 x 15, I replaced them with a set of no name brand 33 x 12.50 x 15 M&S radial LT tires, That was a number of years ago and I have never had a problem with...

You can replace the front's with 24x9.50 x12's which are the same height just 1" wider if you can't find the 24x8.50x12"

Have you checked the transmission input shaft bearing? The pilot bearing stabilizes one end but the transmission input shaft bearing could be worn.

I notice you have the ball hitch on the draw bar...which is the proper position for weight distribution, Do you take the 3 point arms off when using the ball hitch?

Wow...Great job on the restoration. Since you restored the machine I am assuming that those lights have not been on that new paint for an extended period of time so there is probably no paint fade around the light , So replacing them should be a matter of finding a set of lights that cover any...

I doubt these are still made so you may wind up having to replace both lights with something else that covers the area these were mounted to. Your B5100E is in nice shape...a lot nicer shape than mine but I wouldn't get rid of it for anything, a great little machine perfect for small spaces and...

At the risk of making your wife mad I would return the seat and buy an exact replacement if available or even find a local upholstery guy who can make a new cover for you, Your old seat pan was metal and the new seat pan appears to be plastic and I doubt it will hold up as long as the original...

I wish I could afford a tractor with AC...I wouldn't buy a tractor with AC I just wish I could afford one. Just a question but are tractors still using freon(R22) or have they switched over to R234

There are a number of manufacturers/dealers/online sales of farm/agricultural/industrial implement wheels, If you know your bolt pattern you should not have any trouble finding a set of front wheels for your tractor, I sourced a set from agrisupply co for the back of my B7500HST, The price with...

If the rim diameter is the same and the section width of the R4 tires is close to the same section width of the turf tire then yes you can, I went the opposite direction and put R4 tires on the back of my B5100E, I replaced the original turf tires that were on it. I was able to find R4 tires...