Search results

Hi Folks, In the past three years, my SVL95 has gone through three DEF injectors ($1,800) and two NOX sensors ($1400). The NOX sensors go bad because the defective injector leaking on the NOX sensor. Besides being frowned upon by the gov, what are the pros and con when you use a "professional...

Buyer beware for products made by Yanti Gite, a Chinese manufacture of heavy equipment attachments. I had them make a quick connect/rotator for my Kubota KX-080-3. Yanti Gite (a multi Million $ company) sells a lot of products, although in this case, their hydraulic engineering department does...

I have a SVL95-2 equipped with a high flow Loftness Battle Ax vegetation Mulching head. The Mulcher began spewing/leaking hydraulic fluid from the pressure relief port located at the lower back left side, under the protection cover, at the point where the hoses enter the frame. Low flow...

It ended different than you would expect. Here's my story. On January 9th, I ordered and paid for a skid steer sheep-foot compactor attachment from Shandong Brothers Industries Ltd located in China (Hong Kong). As of 8/1/23, because of difficult communication avenues, I could only assume that...

Yes it was solved. Had to replace the hydraulic hitch valve. It was around $776.00. It was a pain to replace.

Yes it was solved. Had to replace the hydraulic hitch valve. It was around $700. It was a pain to replace.

Sorry for the "No response". Kubota had the use their scanning software to determine that the was too much back pressure on the engine side of the DEF filter.

SVL95-2, no power to ignition switch or cab. engine will not crank. With the key "ON" there are no dash lights, no beeps and no buzzing. No start function. I have low voltage going to the fuses in the fuse box (test light is very dim). With the key off, and I press the horn button, the horn...

Hi, This is what happened to my SVL95-2 (2600 hours). Mine would start but would run for a second or two and then shut down. No codes. After taking it to Kubota, they found out that it was the DEF filter that was clogged. They had to send the DEF filter to an out side contractor to be cleaned...

WSM; Good idea, except I could not find a WSM instructions for adjusting the front window. Plenty of videos of changing the front window, but no adjustment video or documentation. Do you have access to WSM documentation?

I have a Kubota SVL-95-2 skidsteerr. Then the front door is open, front door has always been extremely hard to get the latch to "release". Once the latch releases the door slides very easy. The latches open all the way. The thumb levers are very easy to push. After pushing the thumb levers, I...

You were very correct. purchased.

Hi Folks, The hydraulic attachment lock position on my Kubota SVL-95 stopped working. When I push the switch to lock the buck to the hitch, the hydraulics are not actuating. If I move the hitch locks manually into the lock position (note: they are greased and move freely) then push the switch to...

You are excellent and hindsight essays, Congratulations

When sitting in the cab with the attachment hitched to the Skidsteer; there are two (2) zerks on the right hand side. One is on the end of the main shaft, and the other is up inside the cavity, mounted on the side of the pillow-block bearing.

Thanks, hue’s got a nice setup there

I found a two way 12v directional valve although it's rated for 3625psi. I can't seem to find how many pis the second auxiliary hydraulics on the boom is. Can anyone help?

I have 12v to the boom. I don’t know what the switch looks like or is called. I have a hydraulic directional valve although it’s pretty big (6”x 10”x 8”)

I guess my ignorance of excavators is preceding me. My hydraulic hoses come off the hydraulic pump an travel directly to the arm.

The third function is the hydraulic quick hitch