Search results

defective fuel pump.... runs like new again

had to call my dealer my tractor stop running as I was cutting the lawn on my back 2 acres and he helped me try to diagnose it, as what he came up is defective fuel pump hope this is not things I need to look out for as it gets older 115 hrs and 1.5 years old oh well now the dealer has to come...

I got it running, but no luck still loosing power up hills and shakes like it is going to stall I did take a video of the tractor, I have to send to my dealer and let them try to fix it, I had no luck I think it is a defective diesel pump to defective hydro unit, I am using the triple bagger...

I replaced fuel filter now it won't start I now have a dead battery from trying to start, am I missing something? do I need to bleed system? if so how?

I was cutting my lawn today it was 87 degrees, I was all most done with cutting my rms dropped and I was losing power like the brake was on but it was not, then all of sudden tractor was running fine ,twice this happened to me, once I was done cutting the lawn, I loaded tractor on my trailer and...

http://www.prostrobe.ca/live/product/stealth-fire-whtamber/

just installed them so far I am impressed ,no holes to drill in dash easy install, the 12V port goes off with ignition and I have to press button off before I shut tractor off or they will stay on ,not a big issue for me I do have to install the white lights in the front too amber in the rear

took my snowblower off, I stored the blade with quick hitch under deck just in case:rolleyes:been in the 50-60s here supposed to get in the 30-40's this weekend

my 1870 never let me down we had around 14" I run 2500 rpm and the deep street pack I run 3100rpm this storm made me wish I had a cab, my platform was full of snow and froze and made a mess, what kind of cab is that? and what is the cost? easy to remove in the spring?

thanks for the reply, My ROPS are always in the fold position I seen online a set of wireless control lights that gives me 2 amber and 2 white lights and the control gets pluged into cigarette lighter and have double face tape on the back side of the lights and I would mount on them on the...

I am looking to mount either a mini amber light bar or mount 1 amber light on each side of the ROPS any ideas, also I going to use my 12v port under the seat for power, or any other rear power ports are used any ideas,i have 2 ROP lights and 1 rear facing light .my street has 2 blind corners...

from what I have read on the specs regarding the quick removal loader and the manual loader is lift weight is lower on the quick removal loaders,i like the idea of everything quick and easy but lifting weight is more important to me manual loader fwd lift cap max height is 509lbs vs 423lbs...

I was thinking of removing the shoes too, but what kind of damage will occur on my driveway ,if I install a polyurethane blade edge, I am hoping nothing but I would like to see if anyone has a poly blade and had good luck

my only complaint are the shoe's on the blade does anyone make poly shoes ? my current shoes are making slide marks on my new driveway, also has anyone tried a polyurthane cutting blade?

i put the triple bagger through its paces and it worked great on my 1870 i run it between (low pile)2200 and 2500 RPM (deep pile) chops up the leaves.only 2 times it clogged due to me going through a very deep section of leaves with the deck on number 2 on deck height, i recommend the bagger set

i have a 1870 and never had a issue of no power, i have 1-3 acres i cut (hills and angles), i have a 48" deck to get in tight spots,,i have used the loader to move 4 yards of stone up a hill and never regretted my choice, i was looking at a GR 2120 but the cost difference was a better choice to...

i am looking to trade my ROPS for a short set,mine fold, too high for my garage and mine are folded 98% of the time

fits BX1800 Bx1500

i picked up a snow blower with the quick hitch but i already have one for my tractor, i am asking $900 or best offer, i have no idea value so i figure i would start some where.i do have access to put on a pallet at work ,but i prefer local.

has anyone updated there seat by adding a suspension mount to the orig seat or replaced the whole seat for a softer one