Search results

Next 2 pictures are the side of the valve stack that is on the Ferguson could one of those bepower beyound?

This next picture is of the left side BH70 valve body. That is the fittings that are return and power beyond if so witch is witch? I'm thinking the bottom one is power beyond? The bottom one has the short hose with the male quick connect.

This bottom port on the right is what I have going to pressure from the pump

the T at the top of picture is c the return to tank the T at the bottom is pressure from the pump.

Non of the hydraulics are Ferguson its all home made

Dan I will look at the valve stack on the Ferguson and see if there is a power beyond port. If not I may use the 3point hitch hydraulics to feed the BH70. The 3point is also home made and wount be used when the hoe is mounted this Ferguson is a model 20 if my memory serves well.

Yes that's what I thought after writing this all out. Sure be nice to know the location on the BH70 ports so I know what hose does what. That is the question now. Anyone have the answer?

The BH70 valve has no markings so I can't be sure what the 3 hoses do

No it is mounted to a frame that was added to the Ferguson. The whole loader on the Ferguson is home made very stout. I will post up pictures when I can.

Dan are the 2 hoses with the female ends on the BH70 supply and return and the short hose with the male end power beyond. This is assuming the BH70 is set the way it came from factory. I purchased this from an electrical contractor intending to put it on my little Kabota yet he would not give...

Dan I will get some pictures at day light. Super busy today so may not be able to respond for a bit. Thanks

Here is a scary thought I might have figured this out. Do I need to not T into my pressure hose yet run it directly to the BH70 then T the return hose into the tank and that petsty little short hose with the male disconect run it to my loader valve body. The fear I have if this is the case my...

OK I just thought of something could my pressure be just dumping straight through the valve body on the Ferguson? All I did was T off the pressure feed to the Ferguson valve body and T into the return hose to the tank. Am I going to need a separate valve or plumb this different?

Some more information The BH70 has 2 hoses with female disconnects theones with the collar you pull back. These I assume are pressure and return hoses. The short hose has a male quick connect this is the hose I Teed into the what I assume is the return. I'm thinking the return. It comes off the...

I have a BH70 backhoe attachment I mounted to my old Ferguson tractor. The Ferguson have a pump mounted to the crankshaft up front. There is a remote hydraulic tank and a valve body mounted under the seat to operate the loader. So I think easy just T off the pressure and return lines and hook...