Search results

At work cordless tools are my life. Had 18v Milwaukee Fuel stuff impact, drill driver and sawzall. All replaced/rebuilt in less then 3 years. Impact was the worst fixed twice, replaced once. Stuff was junk I'd never buy Milwaukee again Switched to Dewalt brushless been almost 3 years now...

I'd liked to see a picture of your front porch it sounds neat, if thats possible. I bet you could find someone have you looked at Commercial/ Architecture sheetmetal shop that specialize in metal roofs. I'm in a sheetmetal workers local union and you'd be surprised what can be made by someone...

^^^^ boakley. As you mentioned Youtube is a great source of how to ! Yes if your watching a good video ! I've seen some questionable videos on "How to do things" on Youtube. As far as the wet/sticky snow. I put the plow on if its a wet snow only takes 10 minutes.Not by choice plowing takes me...

Your Boiler should have a rating plate inside telling you the BTU load input/output thats what you want to compare to. Or quick guide is 15-20,000 btu per burner 2000sq ft shop with 4 zones seems under sized to me, but you have different climate than I have Im sure. I have a 1800 sq ft I put 7...

Is your house hot water heat ? How many Sq fT ? How many radiators ? 24,00 btu doesn't seem right to me. That be like heating your house with your dryer. I'd guess you'd need something around the 80-100k BtU's

If you got a forced air system Google " Manual J " Load calculations it will get you closer then the link provided. Its what we have to use in the industry.

Church is Sunday morning ? Lol joking aside. You are correct or just doing something good for change Wife and I just give each other cards. And she usually gives a me a box of chocolate covered cherries. If we want something we just go buy it. Like I got myself some new snow pants for when...

Your 32 year old furnace is probably not 95% eff. anymore trust me. And if is a Trane furnace probably has a cracked heat exchanger. We replace more Trane heat exchanger then on any other furnace out there. And the GEO thermal is a cool drafty heat that is sized for cooling so you will only...

B737-- I was very pleased with mine. But like you said the pile does get tall !I think I had a 4' pile about 150' long across my yard. Think next year I might try mulching the leaves first and not wait so long to clear them. And yes you do have to take the wind into account

No just a typo ! Fixed it

Are you using the same dealer Chimpywrench does ?

Wow... Your complaints are Legit. Man I think my wife would leave me for a couple days until they came back to get the tractor. Id be so Pissed. That thing looks like it sat on the lot for 2 years. I had to go out and give mine the once over half way though your video to compare mine. I got...

like my forks work great for moving brush piles

Haven't had any problems with mine other than the newspaper last winter I sucked up trying to be nice to the neighbor at the end of there driveway (they shovel) won't do that anymore. I have the BX2816 front mount

I could use another yard cleaning. most of the rest of my leaves have falling but I been to busy hunting.Now with day light savings I only got saturday Sunday. Guess I just hope it doesn't snow in the 2 weeks ill take care of them then. Unless I done working early one day b737 --- Where did...

I figured it out about 20 minutes after I posted. Thats why I updated my post : Struggling party of one your seat is ready. Lol But yes the blower is pretty sweet. Does a nice job. Only problem I had was when I got all the way across the yard it was little tuff to blower because my pile was...

OMG putting the drive shaft has got me boiling. Why I am I having so much trouble I can't even get it to go on the attachment im pushing it across the floor trying. it doesn't seem like the balls are rolling to lock it in. The slide collar is next to the yoke on the shaft, Tried pushing it on...

The video was good info always nice to see someone do it before you try it. Just hope their doing it right.Lol Bird I'll try remember that on the shaft maybe thats why I struggle with the mower shaft sometimes. Course some days I just struggle in general I also did read the manual tonight

Makes sense I think. Then. like sheetmetal school told me measure twice cut once One dumb question I've never had anything on my 3 pt but my triangle with the ball for moving trailers around.heres my question I got the blower on my 3 pt and when I raised it up, the blower looks tilted back...

Got my blower today..YES ! B737 so you cut about 6' off the shaft. How much of it slides in male end to female end once its cut 2-3" ? You know how much they over lap so the shaft doesn't slip out when raising and lowering