Search results

phone went dead for the main pedal making bit but this is what i have

I have kept going on my stainless revival project.I redid the pedals and finished off the welding on my axle before and after pic's.

I was looking at this splined shaft again and was hoping to see the 3 bolts inside the pulley so as i could take it off complete ,but there was nothing not even the rusted remains of bolts.I took a photo looking into the pulley.I can just about make out a tab of some sorts in one of the 3 holes...

Thank so much for all the advice and info guys.Rob great idea with drilling the lube ports.I have done this by 2 at 180° from each other..the good news is that its going in.Ill do this for a few days as i try get my hands on a set of bottles ill keep ye posted.Steve thanks for the pics.hard to...

ill hold tough for a week or two.ill also polish it up with a standing disc.Thanks men.

Thanks rob...as i feared so. I really dont think there was a split pin in this one.I have filed around where the splined shaft and collar join together and there is nothing, not a pin/ dowl /grub screw etc.Which makes sense to as it can't back off when assembled due to the bolts on the aluminium...

some more pics

Ive had another look.Still looks like the spline must be pulled off the shaft ..no pin or point of separation on the shaft.Maybe removing the pulley will show me more options.

no i was hoping that too.its pushed on to the splined shaft and secured by the bolts on the pulley housing so it cant come loose.

Very nice work. Can you tell me what paint products you used? I'm about to send a few parts for soda blasting and would love to get a finish half as good as yours. .Can you tell me did you soda blast your engine and gear box? Im a bit slow to soda blast the engine for fear of damaging seals...

So I uploaded a few pics of progress in the last 2 posts.....I must fully weld up my work to date so if there are any pointers to watchout for tell me quick cos hopefully tonight I'll have it finished. Now I need some advice please. In the 2nd last pic you can see the splined shaft attached to...

progress so far

this project is getting bigger and bigger

Hi guys,Thanks for the comments.My clutch is en route...posted it to a friend of mine in new jersey.She is just after sending it on its way to Ireland..:).Havent got up to much on it lately.I want to finish the clutch before I do any more. Dave thanks for spotting those lights for me...are...

Tractor Joe processing the purchase.Posting to a buddy of mine in New Jersey.I was chatting with him then looked at pictures on the net.The damage caused by that storm is incredible .My thoughts and prayers go out to all those effected.

yeah guys tnx for the help.As it turns out tractorclutchzone are tied in with tractor Joe...low and behold they aren't responding to my emails now.Thats after they wrote to me looking for my full address . Tnx Rob if you don't mind, you might check that clutch out for me and let me know what...

Has anyone used www.tractorclutchzone.com to buy clutch parts?.I can get clutch and pressure plate for around 200 dollars that's less than half the price it is here(Ireland).The only oversea's company that will post to Ireland that I can find on the net.Can anyone tell me a different/better...

Thanks lad's.Its a healthy mix of time and lunacy. On an aside has anyone used www.tractorclutchzone.com to buy clutch parts?.I can get clutch and pressure plate for around 200 dollars that's less than half the price it is here(Ireland).The only oversea's company that will post to Ireland.Can...

Skeets with your Irish roots you'll know the importance of having a "project" to try keep out of the pub.Only thing is I aimed to stay out for a month or two not a decade.:eek:

Dave, Think that's the way I'll go.Change the release levers and box her up. Thanks for the help guys.