Search results

Thankyou, i did bleed it less than a week ago after i had the filter off and it had ran fine since, i just was paranoid. I will look into the "torpedo" and the 911 stuff. The starter seemed to be turning the crank at the usual rate, and bat seemed very strong. it was pretty happy once cheating...

see my above post, i did get it started this time cheating the starter and cycling the glow plugs repeatedly. I think you are right in that i must have done something upon yanking it out of gear, with it off, without depressing the "clutch" pedal. I still need to figure out that part, but at...

alright! I got it started. I need to explain why i mentioned bleeding better, I did have the filter out 5 days ago and so it was nagging on me, even though it did not really make sense as it has been running and starting fine since then, unless i did not have the filter glass band tight enough...

i'll try bleeding it tomorrow playing with the bleed valve, and then cracking the injector fittings to see if i see diesel there when i am cranking. it would at least rule that out. i wonder if cycling the glow plugs a bunch of times would help... Sorry i am not well trained or acquainted with...

I am not personally putting additives in the diesel, i assumed that since these temps are part of the game up here the peddlers would put something in it, but you know what they say about assumption. However, i went and looked in the can i poured it from into the tractor which is outside as...

alrighty, I have a L3410 hst with a no start condition. I ran it yesterday to turn compost into the pile, the sheep were all over it as they probably thought i was getting them a fresh bale. I left it running while i went and threw them some hay. I got back on it, put it in M and promptly...

talked to the service fellow at MB tractor when i got home. he mentioned using jumper cables to jump battery negative terminal to the engine to isolate if it was frame ground issue. I suppose the engine to frame ground is common, as it was his first guess when i told him the whole issue. i...

alright guys, i could of done more last night but it was the end of the day if you know what i mean, everything was covered in thick dust, or plastic conduit, on the newest mechanical thing i have ever owned (i guess i assumed it was going to be more complicated)... So, we have just under 13...

cute:) ewe know, there is mutton funny about this.:D I was hoping to find a wiring diagram, but that seems to be a no go tonight, i have dredged the internet, and i guess i will need to call a dealer tomorrow and get a scan at the least, and at most buy the service manual i probably should have...

Thankyou guys, the fuse is good, and i have the 13 volts at its terminal. everything has a fine coating of dust/dirt and nothing looks disturbed by anything, like a random branch etc... though i have really just been moving rocks and compost, and digging holes for footing with the backhoe for...

Hello folks, I recently got a new to me L4310 HST wit 1900 hours, for the most part it looks like it was babied all its life. I have put around 10 hours on it. today i tore open the large compost pile with the FEL, and put a mess of sheep guts, etc in it. I went to start the tractor back up...