Search results

  1. V

    I need a FEL

    you might want to try to find an Allied loader or similar made by Buhler industries made and sold in both Canada and the Us
  2. V

    WTB rototiller and rotary mower for B7100 So Cal

    I bought my rototiller at TSC very happy with it in fact a neighbor went and bought one as well
  3. V

    L3901 which PhD best for this tractor

    I have a Shaver ph auger works very well strong and safe bought it used in hindsight probably should have rented one cause now it mainly sits cause my fences are all done used for neighbours sometimes
  4. V

    Building a 5th wheel bucket hitch.

    my trailer supplier did the following: made a plate with two holes 1/2 inch welded a pipe to the top of the plate inside diameter of the pipe large enough to contain the connecting piece of the hitch of the trailer two holes were made in the top of the bucket bolted the component to the...
  5. V

    Strange request: Pine Needle removal

    Re: Strange request Really !!!! all he had to do is adjust the top hook on upper link and then weld an adjustable brace to hold the height leg up when not in usre
  6. V

    Selling Kubota L2900 GST

    manitoba canada
  7. V

    F150 Questions

    nearly all ford truck owners in my area have installed air bag suspension even on just off the lot units Im in horse and farm area best if luck
  8. V

    Selling Kubota L2900 GST

    where are you located please I have a friend looking now for something like this thanks in advance
  9. V

    New tractor

    i replaced a jd 1120 2wd with a kubota l3300 far better and multiple uses only advantage for the jd was lift power and height 4WD ONLY
  10. V

    Learning to Weld

    go to welding tips and tricks new stuff every week no charge
  11. V

    Help me not make a rookie mistake

    1- make sure you get the always useful loader and bucket 2- the next most useful implement is a box scraper with tines I have an L3300 and would never go smaller a fieind with a bx model borrowed my unit and his remark " now thats a tractor"
  12. V

    New here

    im in similar situation just a bit smaller Id go ORANGE for sure The L series works well for me. Get a quick attach for 3ph makes hookups a whole lot easier I feed large squares and load and move them with a homemade bale prong attachment to bucket - not to loader arms= Im able to handle...
  13. V

    Learning to Weld

    try this site welding tips and tricks its very good with weekly videos many around here use it weekly just sign up and you receive it
  14. V

    Learning to Weld

    there is a very good sight called weld monger- he puts out weekly videos they can be from simple to difficult procedures sign up for receiving same well worth it i think
  15. V

    Garden tractor with locking differential

    GF 1800 has diff lock but no 4wd I have had mine for years and do occasionally get stuck in slimy ditch
  16. V

    Left side brake L3301.

    set a price and hold on I could be very interested as im sure others are
  17. V

    Allen Wrench Size, L2000

    you might want to try SAE sizes even though Kubota uses metric good luck
  18. V

    Post Hole Digger for L2550

    I have a shaver 650 works very well best to ask kubota for best fit
  19. V

    "Angle of repose" or "Dad Bermit"

    get a 3ph snowblower and you wont have this problem blowing is better than pushing
  20. V

    Hay trailers

    If you can :: FARM SHOW magazine Vol#40 issue #2 page 29 shows one we made one and it works very well there is another made with an axle wheels and prongs back into bale with the prongs winch it of the ground move it and drop in place they both work well best of luck