Search results

Thanks everyone! Got out the voltmeter this evening. Had 17V across the terminals that maintained across the preheat position of the switch. However, voltage dropped to zero when checking it on the cable clamps. I found voltage on the positive terminal to clamp. Took the battery off, cleaned...

Jumping was at the cables/terminals. So far, the starter has functioned correctly so long as it had juice. I Put the battery back on the tractor and took a look at both the ignition switch and pre heater circuit this evening.The circuit is all contained in the wiring harness, which appears to...

Thanks for the information and tips. I'll try to take a look at the system tonight and report back.

My BX2200 recently decided it was not going to start and I'm trying to track down the issue. Essentially, when the key is turned in the "run" position, all gauges light up and everything looks fine. As I pass by the "glow plug" position on my way to "start", the electrical system crashes and...

orangetractortalks.com/forums/attachment.php?attachmentid=15000&d=1424292677 Not enough posts to link a picture, even one found on this forum. This is the link if it is copied and pasted into your browser with a www in front of it. Mine broke right at the small hole midway down the rod where...

I recently picked up my first Kubota and am working on getting it top condition. It is a BX2200. One of the items needing repaired was a broken feedback rod on the cylinder lift. It snapped at the cotter pin hole midway down the rod. I have no idea what happened to break this rod. I purchased...