Search results

I just received my metric thread gauge. The M2.5 also fits as good as the 10TPI. I don't believe they make a 10TPI 7/8" bolt of any kind. Looks like metric it is! Thanks all

I picked up a SAE thread pitch (ACE hardware), waiting on a metric one to be delivered - no local places had any metric in stock. I checked the existing pin with the SAE gauge and it does closely match 10 TPI. I'll double check with the metric gauge when it gets delivered. Given the course...

Thanks, unfortunately those are not long enough for what I need.

It could very well be! I'll do a bit more research. thanks!

I went to Tractor Supply and found 7/8-9 bolt long enough for what I'd need, however, the lift arm pin I have isn't a 9 thread. The nut from the 7/8-9 would not screw onto my pin. I've only been able to find 7/8-9 and 7/8-14 thread bolts, neither of these will work. I need to measure the...

Thanks. That is .1" longer on the usable side than the ones that I have that came with the hitch. I'm needing some longer. Thanks

That maybe the solution. I can't find any UNC thread draw pins - adjustable or not. thanks

I don't see where they sell "lift arm" or "draw pin". I checked their website out for anything with 7/8" diameter and didn't find anything that would work. Not sure what you mean for bolts. Are you suggesting I buy a bolt and use that instead?

Thanks for that info. I don't live near a rural king and just checked out their website. I found 3 adjustable pins (2 cat1, the other cat1 to 2) 2 say they are NF thread and one didn't state. I'll try calling a store today and see if i can get more details. Thanks again.

I have a trailer hitch attachment that isn't wide enough for my quick hitch. The pins screw into it and are a nc/unc thread. I can't seem to find any, all that i find are nf. I picked up a pair from Tractor Supply, but they wouldn't screw in. They are NF thread. I have a titan attachments...

Maybe I'm misunderstanding. The issue I'm describing is attaching the loader to the tractor, the bucket is always attached the the loader. I've never attached or removed the loader from the tractor while the bucket had anything in it - the bucket was always empty. I need to take the loader off...

I'm not sure what you mean by "push". Are you saying add resistance while trying to move the left side? Or push to give "assistance " to the right (slow) side?

thanks for that experience. I may need to get it taken in for service after all.

Yes, even if it wasn't, that's not the issue I'm trying to describe. For example, when connecting just the hydraulic hose connection and activating the arms as if I'm trying to raise the loader, the arms move at different rates. The left one will reach full extension well before the right, same...

BX2380 with LA344 loader. Recently - last 2 times I've taken loader off, it's been very difficult to re-attach. When sitting on tractor, the right loader arm is "slower" than the left arm when operating the hydraulics to prepare for re-attaching the loader. When re-attaching the loader, the...

Dealer did "adjust" it. Initial they said they couldn't grind because it was a safety issue, looks like they did grind the holes. All works, both pins slide in easy by hand when up or down - no more rubber mallet needed.

Hello all, I'm a new Kubota BX2380 owner (only have tractor with 60" mower deck, waiting on back ordered loader). For the time being, I am parking it in my garage and need to lower the ROPS to clear. Ever since I took delivery I had to beat one pin out/in with mallet. After 2.6hr of use, it...