Search results

I have a load of screened loam to get my yard smoothed out. The lawn/yard has lots of small holes and is rough enough that 2 hours of mowing leaves me with a sore back from the bumpy ride. I read that spreading the loam thinly with the FEL and dragging a leveler is one way of getting it better...

Not to hijack but I have a set of new knives for an older Woodmax 8” chipper I bought and never used. When I sold the chipper (which worked well BTW) I had a brain cramp and failed to give the new owner the extra blades. PM me if you have an interest.

Old thread here but no simple product has shown up. I wonder if this one for a Kioti would work? Anyone know if the mid-PTO is a standard size or if the Kioti and Kubota have the same diameter mid PTO shafts? See...

One lead on the spade in the center and the other to the brass mounting base. Expect a 220 ohm reading when cold and increasing to 3,000 Ω as the engine heats up. You can partially slide off the connector to access the center spade. It is not expensive...

I just sold my Woods BH750 and the J-D 990 I used it on. Prior owner had it on a smaller Yanmar (~28 horse) and it was fine. I worked it hard a few times and I can’t say I ever felt the hoe or tractor were overstressed. I have heard the stories but my experience was great. Good digging hoe and...

Sent PM message to profile.

I’d like the sealed one for the $30. Give me guidance on how to send the $. I can Paypal to your email, snail mail a check, or ?? Ralph in NH 03837

I just changed my BX1870’s oil at 85 hours as the tractor is a recent purchase. Prior oil change was in 2018 at 35 hours by the PO. I did Delo full synth 15W40. As a test I put a sample in my 0º freezer and in a few hours pulled it out to find it thicker but not by much. Sort of like 30W...

I need a panel. Not because of water AFAIK. The signal wire from the alternator is good, the hour meter and all the lights and other gauges work, no moisture inside, clean connector and it is corrosion free but the tach does not work. A new one- (PANEL, METER, Part # K2731-62510) is $273! I...