Search results

Probably easier and cheaper to just get some off of Amazon

I had the MX5800 with the BH92 also but it kinda stinks I can't add a hoe to the cab model MX

That's good to hear

My MX5800 has the BH92 I'd really like to add one to the Cab model I bought

Does anyone know if you can add a BH92 backhoe to a cab model MX series tractor the dealer says there is no mount kit available for the tractors with cabs on them from Kubota?

The clamp on type have their place and work well when they are needed. I use them on machines where the buckets are pinned on. They are better than no forks whether they clamp on or attach to hooks on the bucket.

Hydraulic quick couplers are awesome especially if you go between the forks and bucket a lot like I do. It's been my favorite upgrade that I did to the MX series tractor. I guess the hydraulic quick coupler on my Skidloader spoiled me.

All the Kubota machines I had with Hi flow all also had the electric pin connector yours doesn't have that connector I don't know if that makes a difference or not I know you don't need the electric for Hi Flow but all the new machines that hav e the electric connector that I've seen or used...

Hydraulic quick couplers are awesome especially if you go between the forks and bucket a lot like I do. It's been my favorite upgrade that I did to the MX series tractor. I guess the hydraulic quick coupler on my Skidloader spoiled me.

I like them to be small enough to rotate all the way around without having to take them off and then reattach them.

It's a 04 or 05 model BX23D to be exact depending when it sold. If you go to Messick's website and look up parts for the BX23D you will get the parts you need.

like Mentioned above get the bolt on hook from Home - BoltOnHooks LLC

I don't know about the new Northern Tools 3pt snowblowers but several years ago they were made in China and in my opinion they were complete garbage compared to any of the snowblowers made in Canada

I've never had that problem with any of the BX tractors I've had even the old 2005 BX23D I have will easily lift a full bucket of anything without any problem. Below lifting a heavy log with clamp on forks.

I quit burning wood 8 years ago after the company I use to clean my wood stove and chimney gave me a few sample packs of wood bricks to try. After trying them I bought a skid and then I totally switched to wood bricks after that. The wood bricks burn hotter cleaner last longer on a full stove...

Unloaded 8 1 ton skids of wood bricks off of trailer and double stacked them in garage ready for winter 😀

That looks awesome

The BX23D I have is a hydro. I used a hand held meter to see the rear pto spin at 540 rpm I then looked at the tach to see what it said the engine rpms were and after doing this several times It was very consistent. I don't know if it will change under a load. The manual says to run the...

Yes it does and it works really well. I placed a hand held tach on the rear pto so I could see exactly what RPM I need to run to get the 540 rpm out of it.