Search results

advice needed. looks like shear pin/bolt hole is wallowed out in both the crankshaft and the end of the crank..... unless there is a such thing as a shear slot pin.... did some search and have not seen such an animal online. anyone seen/heard of such a thing.

starter replaced at a surprise to me good price. (less than 100 bucks) and it is a gear reduction starter. Took a good bit of part number cross referencing to find starter that "should fit" (and did) based on cross references. Ordering by engine model for what appeared to be same type delco...

the starter turned. but slow..... and it smoked. The solenoid did not function at all. Have possible new starter (cross reference) that will arrive Monday or so. Hopefully it fits.

there is 12v and 24v versions of this engines starter. The engine was shipped with out a starter from manufacture to end user when it first sold

bought an old CASE 1537 with a transplanted Waukesha diesel (4cyl 180DCL). Waukesha Engine Historical society tells me that by serial number engine is 1957 vintage. Have been studying the drawings and workings of the engine. Was wayyyyyyy ahead of its time with swirl chamber in pistons AND...

thread locked cause we got a good smattering of science mixed in with the opinions. From this point forward we are just beating a dead horse. We get it. one thing we have to live with is the constitution grants rights to EVERYONE including those whom someone else somehow calculates to be...

not getting reports either

just pull the battery and take it to auto parts store. 99% load test them for free as does wally world

sorta..... what really came about is my confederate tattoo got covid. :geek:

not that anyone missed me lol my computer took a dump after a storm. Had to get a refurb. unit then re-figure out how to install linux. Been six years since done it last.

Re: pic too large example Thank you John T. Exactly what was looking for. Other member I made this thread for to share a pic into never posted up.

Below is an example

for both of those I put the part number in internet search engine (google) and a ton of places popped up. then there is Messicks too which many in here have success with. also if you look in the very first thread stuck to top of this classifieds forum ..... in it you will find links to used...

did some searching.... man there is no info i could find out there on construction equipment gray market stuff. wish could tell you more. hopefully someone will chime in

HUGE face of project--- - remodel home to rent out.... then live in when old and feeble. Remodeled to match small log cabin on property.... to house medical student to be my care provider when old and feeble. - building expedition camper to live in while remodeling/renting home , some...

fixed bump proceed

Does the L245 have the drop speed adjustment? knob under the seat behind your heels as does the L225 L235?

you may have done this already but Call messicks just to make sure they actually sent you the correct part number.

my L225 has different wheels.... much wider... it's raining cats and dogs outside though. Anyone know where on the wheels do they usually put any identify info .... Once I know that I can go scrape off mud and dirt and try to read it.

off topic.... you have an 84 Mog? hmm. 416?