Search results

I can't believe the difference the front loader makes to a tractor. I've been driving tractors since I was a kid but this L3450 is the first I've driven with a loader. The difference between having the loader low or off completely on hilly ground is astounding. For the sake of the 10 minutes it...

Thank God! I thought i was the only one using. It's been quiet for a couple of days

I don't know if it would be an issue, but it sounds like the front wheels would have been submerged. Water may have pushed it's way past some seals around there.

https://www.youtube.com/watch?v=1gWQUeJgczc I hope you can see the "V" pulley I was on about before in this. Once "hooked in" you don't need to touch it again. This is only play fishing. In reality, these pull the boat along the rope with no need for a driver or stopping the pulley every time...

No. If the rope is sized properly for the pulley they have a very good grip. You are basically just coiling the rope. If you look at "Deadliest Catch" that is what they are using to haul the pots, except bigger. On the boat I used to fish you had to set the pressure release valve so that it...

I was trying to post when the laptop calved. I was thinking of something like a pot hauler that they use on boats. It is like a "V" pulley instead of a capstan and there is a "knife" to stop the rope getting caught in the groove. To disengage the pulling action you simply pull sharply on the...

We have been using a version of that here for years with MF135s. If the trailer wheels are the same size as the tractor wheels then you can just use the "ground pto" without any need for gearing or hydraulics

You can't take down the decorations until after "Oiche Nollaig na mBan" :eek::eek::eek:

Had this in a previous life. I was over aggressive with the knob and broke it. Ended up I had to put a vise-grip on the shaft and turn it with that. Basically, don't get too strong with it.

I don't expect to be able to move after dinner tomorrow :D Merry Christmas everyone

Great pics. Keep them coming. I'd love to get a good telescope but can't justify the expense when we get so few clear nights.

Unless it's imperial gallons which would give you 50 litres and much easier maths. 100ml or 1/10th of the bottle

Great work. Well done Sir

It's always cloudy here when there is anything to be seen :(

I just find this guys videos entertaining and informative. Kinda "Git'erdone" sort of thing: and he owns a Kubota https://www.youtube.com/watch?v=EAvt7hj2-XM

I hate to say it, but I think you may have posted this in the wrong section. That's just the way it is now. The yutes just don't seem to have the same respect for family anymore. If you can't work mammy and daddy between ye then they are not the problem

Might try this next time

I know of a couple of printers that sometimes will not start. The fix from the manufacturers has everyone baffled but it works. 1 Unplug it from the wall 2 Open the ink drawer 3 Take the fuse out of the plug 4 Put the same fuse back into the plug 5 Plug it back into the wall 6 When it tells you...

Use the backhoe for digging and use the loader for moving. Remove the topsoil first before you start digging into the gravel and pile it aside for use later. Remember that you are not going to be digging to level the ground to its lowest point. Use high areas to fill low areas and you won't...

This is the screw thingy on mine Screw should be at position "O" when the loader is off the tractor