Search results

looking at the grand L

I have been thinking about upgrading to a new "l" series but I don't see a mid mount mower is available for the "l" Is anybody running a mid mount mower on a newer "l" series?

thanks for the input , been thinking about this for a while and the plan of attack is going to be a separate generator. I just don't like the idea of the tractor running for hours and hours.

Thanks for the info. So I was without power for 5 days when Isaias came through a couple of weeks ago, I have a pto generator for the basics to keep the house going. My issue is that the tractor is running at around 2350 rpm to run the generator. I feel like the tractor can run the...

Has anyone used a pto rpm multiplier? If so who sells them ? Thanks

thank you !!!

Anybody know how much refrigerant and oil this system takes? Also what type of refrigerant 134a ? thanks

I have had several issues with poor welds in my machine, mostly one sided cold welds

you could make a shim for the housing extension where it bolts to the main housing (thicker end at the bottom) but to be honest the juice may not be worth the squeeze probably easier to rotate them regularly.

the glass will need to come from the dealer, (best to buy local, online suppliers will kill you on shipping if its a large piece ) the only bolt in piece is the rear glass. if its a bonded piece of glass i would order the glass ad have a mobile glass company in stall it if your not...

5 amp fuse is likely blown was the parking brake set ? my b2650 will blow the panel fuse if the parking brake is set with the power on

check the safety switch on the foot pedal. two ways to get at it, either from under the machine or pull up the floor mat and there is a metal inspection cover, remove it and you can see it from the top, fyi i had the same issue and that safety switch came loose

thanks !!!

So I killed about a half day today trying to resolve this issue with no success. Anybody know were i can get a wire diagram ??

i would start with the hydraulic oil level, then take a look at the 3 point lift arms as the lifting levers work off off of them

always thought that Messicks discounted there parts , turns out they do not. so it is worth checking to see if any of the other sites do

at the end of the day it's just a piece of steel bar, heat it cut it weld it etc and make it fit the way you need to

i have the same issue , easiest thing to do is lock the lever

If i set the parking brake with the machine running it will blow a 5 amp fuse and the display on the dash will go dark and no crank. If i release the parking brake and replace the fuse all is good. I replaced the safety switch and still have the same issue. Then i pulled the dash cover and...

I have a similar issue. If i set the parking brake with the machine running it will blow a 5 amp fuse and the display on the dash will go dark and no crank. If i release the parking brake and replace the fuse all is good. I replaced the safety switch and still have the same issue. Then i...