Search results

I would never laugh at you! Maybe i need one of these.

I understand what your saying now. I wonder if Kubota changed the lever material? Things are hard to get even for Kubota im sure! I guess you will have to shoot it with your lube of choice every now and then. I squirt a little WD 40 on that every now and then.

Well maybe Im doing it wrong but mine starts right up every time. First off even just below 32 degrees I only hold the glow plugs on for a 5 count never 15 or 30 seconds, and my throttle is all the way down when starting and shutting it off. Maybe your holding the glow plugs on too long?

My 2017 BX23S back hoe sits outside all summer but indoors all winter. My back hoe release levers have never rusted and still release easily. I can't understand why yours are so rusted? Mine are just levers that open a set of jaws that release the back hoe. Not sure I understand your having to...

Speedybon what do you use it for?

Nice cab David! How do you like that heater? Good output? Im trying my ceramic heater this year that came free with the soft cab. I imagine I will run plumbing for a real heater eventually!

RCW! Wait! Im on my way! Its only a two hour drive!

Muddy you should let your tractor warm up a bit before putting it to work. Once the hydraulic oil warms and flows easier the whine becomes less. Kubota warns not to work the tractors hydraulics cold.

Not sure but I would think a french drain for the hole would be needed!

Unfortunately your puncture is in between the lugs of the tire. This area is very thin material. I had one in the same spot. The plug I installed leaked because you have to ream the puncture to install the plug which normally works but thats when its used in the lug area which is thick and will...

Geez that was an easy fix! :rolleyes:

Anybody spying on me has got to be pretty bored!:sleep:

I just went to my dealer for filters. Compared to usual they didn't have much on the lot!

I pull a 5 foot box blade no problem on my BX23S! You should have no problem but I guess it all depends on your soil.

I highly doubt the BX's hydraulic flow will be enough not to mention slow going with very short reach. Note the track loader being used in the video. Even if it did work you will be throwing wood at it or constantly flipping the seat around to travel to the wood. Like I said before as long as...

Ahh the press. Always up someone's butt trying to make them reveal some juicy information so they could make a big deal out of it an advance themselves in their organization!

Make sure your not too far away when engaging the quick connect. I had the same problem you did but just once. Once the o ring inside is damaged it will always leak. Many owners have had nothing but problems with these but mine is still working fine since 2017!

Its a shame what they did to you over at TBN! Yeah a real shame because now your here.

Keep practicing and keep the rpms up in the backhoe range on the dash. Remember when digging with the backhoe all your digging power is in the curl. It takes some experience and finesse to also use down pressure while dragging backwards and using the curl all at the same time. This is how you...

Man where do they get these prices for chains? I just dont see $750 there! Sheesh!