Search results

See if the dealer will throw in a set of WSM‘s on disk for your troubles?

Tire selection may help you a little also. Go find a dealer with it already mounted if you can and measure it yourself - take a step stool. If I remember right mine was supposed to be 101” and in actuality you can see it’s quite a bit less. I do have a pretty steep apron angle so it’s going to...

I'm with mikester . About 2-3 hours is the max I can spend in the seat before I start hurting. I'm 230 lbs. and it bottoms out even on the stiffest setting. Only reason I haven't gone to air ride yet is I really like my seat cover 🚜

Made a bracket for rotating LED while snow plowing. Put in index bolt so I can line up easy and if I hit something not to hard it will keep bracket from swiveling and striking top. Painting today. The light is battery operated and magnetic mount. Can still fit under 8’ OH door. Oh, and...

I believe in-line with lift arms places the stresses in the correct places on the FEL. Less chance to tweak your bucket and cross tube also. I’m just regurgitating previous posts as I don’t have hooks (yet). I have the HD bucket so I’m probably going to have hooks welded on. Someone here even...

Thanks for the heads up boss! Perfect time to engage in conversation with the wife o_O

Gonna have to pry the BH from my carcass, I'm always using it from May - September 👊

https://specialtyrepairscustommods.com/beverage-mug-holder

This place has a ton of very practical add ons for your 60 series. Kathy runs the office and Paul is a first rate fabricator. https://www.specialtyrepairscustommods.com/ I have purchased 3rd function skid plate Dif lock pedal BH 92 steps Cup holder Strobe light bracket kit

Very nice! I sure like my 4060. Keep the pics coming.

I’m not the best mechanic but the WSM says the speed sensor plugs into the ECU.

When you get towards the end of a row slowly start to raise the tiller while it’s still engaged. No “potholes” that way.

Another label installed so I can “remember” 🤔 Got to get a 45 so I’m not hitting my PB line every time I raise the 3PH.

My work has a farm and gravel parking lot down the street from me. I use a LPGS to grade those. If I have to use the shanks due to continuous heavy construction traffic, I follow up with shanks fully retracted. Fine tuning takes a bit of on-off and that’s why I installed hydraulic top link. If...

I chose Kubota which is way to pricey! I wanted TnT but since I have BH Kubota says “can’t do TnT”. My dealer takes the top cylinder and makes it up for customers. That being said, there is no check valve, so you have to keep an eye on it and adjust accordingly, I think? The upside is the check...

Installed hydraulic top link.

No it was replaced by the lX2610 model. I think in 2020.

Call Neil at Messicks and see if it’s the same situation? Maybe your dealer can do a trade? https://www.messicks.com/

I found some weights from Canadian literature from Kubota. If it’s a new tractor ask your salesperson for their build sheet - helps with #’s.

Put a battery maintainer in. Won’t help with the smoke color issue but sure turns over easy. After she starts bump the throttle up to 1500 RPM while she warms up.