Search results

I like the carry all, I bought one of those at TSC but wouldn't hook up to my QH It would make a decent ballast with some boards and sandbags filled with sand.

With these after market ones that comes with the wrench (rod) are you suppose to hammer those into the top link? Mine only fit about 1/4" in the link. Also noticed the top link holder doesn't fit and is in a perfect place to get bent.

Found one at Kubota dealer for $20.00, after market but it works. Dealer said no need to spend $165.00 for OEM

Thanks, would be hard to measure the longest since it is bent pretty good.

Anyone know off hand which one of these at TSC I need to fit the B2320? I read to measure my old one but how? Measure at it's shortest or longest or the body..The body of mine is 14"

I have a B2320

Been fighting with this since day one, the tiller would hug to one side (to the left) tried moving the lower lift arms in and out and what not. I notice today the bracket on the tiller that holds the pins for the 3pt lower arms were off set to one side about a 1 1/2". I don't know if that is the...

I tried it with my QH and it didn't work at all...Not with QH hook or with the adapter. I believe mine was welded up wrong with the lower pins....I returned it for refund at TSC. I since lost interest in that whole idea old thread

Wouldn't you have to change the reflector out too?

I keep breaking the rings on the lynch pin on the 3PH. I see how they're breaking but not sure how to stop it. Here is a pic of left side, looks like the 3PH is sliding over and breaking the ring.

3..2...1...police will be out in full force

I use a Mojack, works fine with lawn tractor or ZTR..I think it's good up to 700 pound.

I could use the hook with my implements but it was a real pain to do so. Had to remove the pin in cutter/tiller and find the spot where it would line up and replace the pin. Just seems like my QH is really tilted towards the tractor now, that was the only way I could use the adapter. Other wise...

I have a Speeco QH, may give it a try..I don't want anything else that I have fight with or make changes too for fit.

Was it the top link that didn't fit? I been thinking of getting one too, I called Tarter..they said it would work fine with QH. I have since bought the China made QH adapter from Everything Attachments. I was going to use the carry all as a rear ballast (add some weight to it)

Had to shorten top link a good bit.

I was wondering if using one of these will throw everything out of whack? Like the cutter or tiller?

Well to tell the truth I didn't get much better information from calling Kubota. They said their box "B8160 may be quick hitch compatible but it may not be." Same answers from Coleman and Messicks for the most part. I will find one or have one built, I could always hook my tiller up I guess and...

Does this work with a quick hitch? I called Titan but got yes/no..maybe answers