Search results

I just looked up the part numbers the control valve is the complete unit $608.00 Two o-rings $1.26 each

I was reading on another site that the existing factory valve can be adjusted. The poster said the dealer used the following parts and adjusted the valve, he said is was much smooth as butter. Assy Valve Control Part# YR908-00105 O Ring Part# 04817-00120 the control valve was removed and...

I actually live in VA Beach. I have some mountain property in Amherst Co.

I bought mine here http://www.tulsachain.com/asccustompages/products.asp?cartID=325735784&affID=&categoryid=707&navParent=437 Cheapest place I could find them. I haven't welded them on yet. I plan on welding them to some 3/8 x 2" flat bar and then weld the flat bar to the bucket. Logical...

You might want to figure on putting a set of slotted holes to allow in between hole adjustments. The factory Kubota ones that I have on my L3800 have the slotted holes. Just so you know the factory ones cost me $170.00 delivered.

Anyone getting ready to order a T&T for your Kubota L3400 or L2800?? When I had my tilt cylinder made I thought that I was getting a L3400 and then Brady Barlow upgraded me to a L3800. According to Brian at FitRite my tilt cylinder is too long. I was hoping to trade cylinders with someone...

Rick If you need some help I'm not too far from ya.....I live in VA Beach when I'm not playing in the mountains.

Finished up my rear remote and top and tilt install on my new Kubota L3800 this week. The spool valve and hoses are from Surplus center. I went with a four spool Wolverine valve. All of my fittings were purchased from Discount Hydraulic Hose, they're close enough to me that standard ground...

Thanks for the input. I ordered all 6ft rake, blade, box blade.

Thanks I've been searching the forums for discussion and haven't seen this one.

That's the first I've heard of a suction issue on the hydro circuit. Everything I've read leans toward TPH valve quality on the LXX00. I should rephrase "ordered" it was the last one on the lot and I got a pretty sweet deal on it. The dealer had to order some of the attachments and install the...

I ordered a L3400 two weeks ago and then this week I'm reading about the three point on most LXX00 series are not smooth to operate as they should be. I read somewhere that if the three point control valve is swapped with a Grand control valve it would be smooth as silk. Does anyone know if...

Thank you Babyfat

Does anyone know how much the total weight is of a L3400 with R4's, LA463-1 with 66" bucket and a BH77 with a 16" bucket.

Getting ready to buy a L3400. What width box scraper and rear blade should I get?

I'm new to tractors not to heavy equipment. I've worked in the construction business for 31 years. Getting ready to close the deal on a new B3300SU FEL with quick attach, Backhoe, pallet forks and a few three point attachments. I know most of the basics for delivery inspection, Check every...

Bing187 That's great! do you have any pictures? I'm getting ready to pull the trigger and get the same. Can you tell me the total transport length with the FEL bucket rolled under and the backhoe folded and swung to the side? If you don't mind me asking how much did you pay for the package?