I should have known

[skeets]

OK well the missing bolts are just the tip of the problem. It seems I had been avoiding the removal of the rear tire because of the wheel weight and loaded tire not I have to. The left rear lift arm the one that lifts the linkage for the deck, the ear that is attached to the linkage is broken off. So now I need that lift arm and I cannot find it on messicks site maybe its a MIA or no longer made,, anyway here is the digagram and the arm does not have a part number. Any help here guys?

https://www.messicks.com/catalogs/kubota/bx2360/top-link-top-link-bracket-pto-protector/k13100-mower-rear-link-lh

And on top of that I broke my freekin glasses,,,, grrrrrrrrrr

 

[lynnmor]

Is it number 80 on this drawing: https://www.messicks.com/catalogs/kubota/bx2360/pump-motor-system/j31000-hydraulic-piston-lift-arm

 

[North Idaho Wolfman]

Every linkage in that picture has a number????

 

[skeets]

Yep Lynn thats the one,,, only 160 bucks,,,, just like HD parts,, lol Thank you

 

[skeets]

Every linkage in that picture has a number????

I guess I was looking under the wrong drawing I figured it was in there some place I just couldnt find it,, Yinz guys is the best Thanks

 

[Shawn T. W]

only 160 bucks,,,, just like HD parts,, lol

I thought HD stood for Hundred Dollar ... Must be that inflation catching up!

 

[skeets]

OK guys more help,, I got the wheel weight off,, and the wheel after having to fix the impact wrench, now the linkage is off and none the worse for the wear from what I can see. And yes it is up on jack stands. NOW how the hell do I get to the lift arm I can see it, but between me and the snap ring is a big piece of black plastic looks like a tub of some kind,, and just because I cant find it in the drawing dont mean it aint there.. If you look under the finder, between the tail light and the cup holder thats where it is. I cant figure out how to remove the damn thing. Anybody have any ideas?

 

[North Idaho Wolfman]

OK guys more help,, I got the wheel weight off,, and the wheel after having to fix the impact wrench, now the linkage is off and none the worse for the wear from what I can see. And yes it is up on jack stands. NOW how the hell do I get to the lift arm I can see it, but between me and the snap ring is a big piece of black plastic looks like a tub of some kind,, and just because I cant find it in the drawing dont mean it aint there.. If you look under the finder, between the tail light and the cup holder thats where it is. I cant figure out how to remove the damn thing. Anybody have any ideas?

Do you mean this "tub"
Yea don't go poking holes in it.

 

[skeets]

Now why the hell did I think of looking there,, good thing I didnt stat cutting,,,,,,,