BH77 custom mount opinions.

[IronDPT]

I am purchasing a BH77 for my L2501 and will be making the subframe mounts as he is keeping the old ones.

If you were to change anything about the mounting position of the backhoe what would you change? I.e. higher ground clearance, further away from tractor etc.

Thank you for all opinions.

I will NOT purchase it through Kubota for $2000.

 

[TheOldHokie]

I am purchasing a BH77 for my L2501 and will be making the subframe mounts as he is keeping the old ones.

If you were to change anything about the mounting position of the backhoe what would you change? I.e. higher ground clearance, further away from tractor etc.

Thank you for all opinions.

I will NOT purchase it through Kubota for $2000.

Mighr want to make an offer.

Kubota l2501 subframe

Used frame only no bolts like new condition asking $400

www.orangetractortalks.com

Dan

 

[MapleLeafFarmer]

I have a BH77 on a L3301 and would not change anything about the mount as it works fine for me.
On uneven ground i can unhook in just a few minutes. Hooking up takes a few minutes more but no more than 3 -5 minutes in total so for me it works fine.
Only issue I can ever think of is when tractor seat is all the way back it touches the seat on the BH77when down ever so slightly.

 

[MapleLeafFarmer]

Mighr want to make an offer.

Kubota l2501 subframe

Used frame only no bolts like new condition asking $400

www.orangetractortalks.com

Dan

great memory.
like he said missing bolts but i'm not sure if the 2 unique to Kubota top pins are part of sub frame or BH? might be something needed to be added to project BoM if MIA.

 

[Runs With Scissors]

I can’t think of anything I would change on my sub-frame.

Sounds like a cool project though….Make sure to take and post lots of pics.

Do you have a “plasma cutter” or “water jet” machine?

This board is filled with very talented people as well

 

[Runs With Scissors]

great memory.
like he said missing bolts but i'm not sure if the 2 unique to Kubota top pins are part of sub frame or BH? might be something needed to be added to project BoM if MIA.

And if my memory serves me, the big pins were/are relatively cheap……I lost one, and had to replace it………..(then my wife found it of course, so I kept it as a “back-up)

 

[TheOldHokie]

great memory.
like he said missing bolts but i'm not sure if the 2 unique to Kubota top pins are part of sub frame or BH? might be something needed to be added to project BoM if MIA.

Since you h

And if my memory serves me, the big pins were/are relatively cheap……I lost one, and had to replace it………..(then my wife found it of course, so I kept it as a “back-up)

$30 each. What makes them "special".

Dan