BAD AIR

billwiley

New member

Equipment
l48 with bt1100
Apr 21, 2025
3
3
3
locust nc
Replaced a few hyd hoses on bt1100. I FAILED to fill the new lines when installed. Now it won't move and i'm scratching my head. Dealer says fill with oil and keep working it. Air will escape on it's on. Well I've been working it for two days and still nothing. Dealer also said there are no bleeder valve on that unit. I did notice there are ports with allen head plugs where fluid goes in the end of cylinder. Is that where I need to be?
Thanks in advance
waldo
 

L35

Well-known member

Equipment
L35/TL720/BT900/York rake/Valby chipper
Jun 13, 2010
565
489
63
CT
They will self bleed, usually within seconds of replacement. Something else must be going on. Your hydraulic fluid level is up to spec?
 

Mitjam

Well-known member

Equipment
M-108, M6-111, Lx3520, Rtv-520 and LandPride implements
Jan 14, 2013
319
371
63
Edmonton, Alberta, Canada
Replaced a few hyd hoses on bt1100. I FAILED to fill the new lines when installed. Now it won't move and i'm scratching my head. Dealer says fill with oil and keep working it. Air will escape on it's on. Well I've been working it for two days and still nothing. Dealer also said there are no bleeder valve on that unit. I did notice there are ports with allen head plugs where fluid goes in the end of cylinder. Is that where I need to be?
Replaced a few hyd hoses on bt1100. I FAILED to fill the new lines when installed. Now it won't move and i'm scratching my head. Dealer says fill with oil and keep working it. Air will escape on it's on. Well I've been working it for two days and still nothing. Dealer also said there are no bleeder valve on that unit. I did notice there are ports with allen head plugs where fluid goes in the end of cylinder. Is that where I need to be?
Thanks in advance
waldo
Honestly as stupid as It sounds make sure your hoses are 100 percent connected properly. Unhook hoses and Physically push in on detent with a rag on a piece of wood make sure they will release and seat back properly. And if hoses are hooked properly does the hoses that supply that backhoe flex like there is fluid going to it ? All else fails crack some fittings will make a mess but at least you can see where the fluid is getting to
 
  • Like
Reactions: 1 user

billwiley

New member

Equipment
l48 with bt1100
Apr 21, 2025
3
3
3
locust nc
problem solved sometime people do stuff in a hurry. Mitjam got it. I'm not going to tell everyone I had the lines crossed. DUH Thanks for your help
Happy Tilling
 
  • Like
Reactions: 2 users