Tx Jim's latest activity
-
TTx Jim replied to the thread Non Functioning Draft.I'm curious what ground engaging implements do you normally use that require use of draft control? One would think dealer technician...
-
TTx Jim reacted to Runs With Scissors's post in the thread Fan belt, ac belt came off M9540 with
Like.
Do a “wiggle test” on all of the pully’s to check for a bad bearing. I had a very similar thing happen one time on a truck. Turned out... -
TOne loose belt can cause both belts to come off?
-
TTx Jim reacted to North Idaho Wolfman's post in the thread Fan belt, ac belt came off M9540 with Like.
One loose belt can cause a lot of that.
-
TYou have to contact them for pricing, but AP Air has all the parts you need to fix your air conditioning system...
-
TTx Jim replied to the thread M9540 Air conditioning problem..Install a manual heater hose control valve & be sure it's closed. Make sure exterior of radiator, condenser & evaporator are very clean...
-
TuUnfortunately I think this is one of those situations where you need to know how much refrigerant is in the system and the only way to...
-
TTx Jim replied to the thread Weak air conditioning.No way I will add refrigerant without monitoring both high & low gauges. A little too much refrigerant causes poor cooling similar to...
-
TTx Jim replied to the thread M7040 hydraulic shuttle problems,.Thank you for posting your photos more especially of the broken spring.
-
TDoes that work? Or are you looking for a different picture? I'm happy to try and take one that helps someone else later.
-
TTx Jim reacted to Tughill Tom's post in the thread Bubbles in radiator straight after startup with Like.
Pressure test will tell, most likely head gasket and get the head checked for warping and or cracks.
-
TTx Jim reacted to Russell King's post in the thread Bubbles in radiator straight after startup with Like.
I agree with @Hugo Habicht that it is probably the head gasket that is leaking combustion gases into the radiator. You will probably...
-
TTx Jim reacted to AusM4500dt's post in the thread Bubbles in radiator straight after startup with Like.
Hi all, I have an m4500DT. Bought second hand and the old owner told me it "runs hot". Sure enough, after 30 minutes or so of...
-
TTx Jim replied to the thread M7040 hydraulic shuttle problems,.Congratulations on your successful repair. Could you please post a photo of your tractors shuttle valve & broken spring?
-
TI disassembled the shuttle valve, and I did find a broken spring. My best guess looking at wsm and hydraulic diagrams, is it was the...