Tx Jim's latest activity
-
TSo not sure what to do, but in my gut the problem is the shuttle valve. It's a expensive valve. Alot to spend and not be sure that is...
-
TTx Jim replied to the thread Weak air conditioning.If that tractor was under my supervision & it had a very clean exterior of radiator, condenser, evaporator & cab filters I'd add more...
-
-
TOk, recharge first. If that doesn't change things, could be a faulty TXV or compressor.
-
TIn my experience your pressures are way off. I've rarely seen a system (R134A) run properly at over 25 PSI on the low side. I usually...
-
TI would evacuate, vacuum, and recharge with the correct amount of refrigerant to start.
-
TWhat he said, low on refrigerant.
-
TSounds like it is low on refrigerant.
-
TPolypropylene can be ultrasonically welded but most home owners don't have access to the that kind of equipment. Ultrasonic welding is...
-
Tdepends on the material it's made of. I work with a lot of polypropylene and NOTHING sticks to it. Nothing! We have used everything...
-
TTx Jim reacted to North Idaho Wolfman's post in the thread Repair Plastic Fuel Tank on M7060 with
Like.
Diesel tanks are a mix of several layers of material mainly PP ( polypropylene ) Trying to heat weld PP is pretty much impossible to... -
TMost likely the temp blend actuator is bad. It directs air flow to heater core for heat.
-
TIf you can easily get it back to the dealer they should be able to fix it under warranty of the fix that didn’t fix it! Heck, they may...
-
TThat dealer did you no favors. Either the issue was not copyable, they did not get the proper history of the issue, or they simply just...
-
TTx Jim replied to the thread Hello from a new guy in Texas..Welcome to this forum
-
TTx Jim reacted to McMXi's post in the thread M4-071 Shuttle Shift Issues (Won't Drive Forward) with Like.
This might be utterly irrelevant, but a few months ago the shuttle shift lever in my M6060 felt odd. I wasn't experiencing any issues...
