Tx Jim's latest activity
-
TAll the information you need is on pages 3-M7 thru 3-M12 and 3-S13 It shows all the test ports and all the pressures to expect at each...
-
TThe pages 3-M7 to 3-M12 have the instructions on the bottom of every page on what part needs to be serviced if the pressures are wrong.
-
TTx Jim reacted to North Idaho Wolfman's post in the thread Kubota m-9000 spitting oil out of valve cover vent tube with
Like.
How much air is coming out with the oil? Pull the Oil fill cap with it running, set it on top of the hole, if it acts like a pressure... -
TRemove the wheel, and remove the fuel tank. Install a gauge or gauges. Fix a 2.5-gallon jug in place under the operator's platform, fill...
-
TI will add you can remove the fuel tank without removing the tire. Even though the instructions state to remote the tire to drop the...
-
TTx Jim replied to the thread M8540 Flood Damaged.Welcome to this forum I think it's a high probability that your tractors problems are flood related! Have you changed hyd filters...
-
TWhat were the pressures?
-
TTx Jim reacted to wheelinag's post in the thread M4900 Hydraulic Problems. Power steering, PTO are OK. Everything else weak with Like.
Finally got the pump in yesterday. Looks like this ordeal is over. After installation, I had the relief valve almost all the way out...
-
TWet clutch for the win! 😂
-
TThe M8200HD also fits OP's description, I think. It's a hydraulic shuttle. Edit: there's also an M8200 two wheel drive with the same...
-
TTx Jim replied to the thread Mx5400 Gear Drive won’t shirt.Tractors aren't constructed with same materials as many yrs ago. I suggest when parking tractor for extended period of time to block...
-
TI don't know if this is a Kubota thing, or if it's due to the use of new materials by all manufacturers. I never heard of it with 40's...
-
TTx Jim replied to the thread Mx5400 Gear Drive won’t shirt.You're welcome
-
TTx Jim replied to the thread L2900 Won’t turn over..Thanks for updating your thread & explaining outcome.