TheOldHokie's latest activity
-
TheOldHokie replied to the thread Hydraulic Issues - Ideas?.Di you have draft control? Dan -
TheOldHokie replied to the thread Hydraulic Issues - Ideas?.Does the loader work OK? Dan
-
TheOldHokie replied to the thread Front loader for a B7200.The B7200 outlet block relief specification is 2060 PSI. The B7200 3pt lift is rated for 400 pounds max at the pins. The B1630 loader...
-
TheOldHokie replied to the thread Hydraulic Issues - Ideas?.Maybe Universal Dynamic Tractor oil? 🙄 Dan
-
TheOldHokie replied to the thread Hydraulic Issues - Ideas?.Does the 3pt lift come all of the way up with nothing on the lift arms? Do you have any other hydraulic accessories like loader, rear...
-
TheOldHokie replied to the thread L4400 fel not working.BEFORE doing anything put identifying marks on the loader hoses connected to ports C and D on the hydraulic block. I would suggest paint...
-
-
TheOldHokie replied to the thread Front loader for a B7200.I will have to look at my msnuals. The lower relief pressure absolutely lowers the 3pt lift capacity. I have no idea why that was...
-
TheOldHokie replied to the thread Fake Kubotas.Over on the vintage tractor forum we have lots of folks with N8 tractors :oops: Dan
-
TheOldHokie replied to the thread Front loader for a B7200.I would set it higher that the tractor. Dan
-
TheOldHokie replied to the thread L4400 fel not working.I think you missed my poimt - I dont fully trust the judgement of inexperienced third parties :rolleyes: Dan
-
TheOldHokie replied to the thread L4400 fel not working.In 40 years of user assistance much by phone/email I have been fooled too many times. Since I am not there to listen I can't judge what...
-
TheOldHokie replied to the thread L4400 fel not working.Thats a good and timely question. Up until a few weeks ago I would have said no but somebody here had one that did. Or at least...
-
TheOldHokie replied to the thread L4400 fel not working.If you measured 3 gallons in 20 seconds thats 9 gallons in 60 seconds = 9 GPM. The Kubota specifation is 8.4 GPM sounds good. Dan
-
TheOldHokie replied to the thread L4400 fel not working.Its simple arithmetic. 3 gallons in 20 seconds = 9 gallons in 60 seconds. So your test showed 9 GPM at full throttle? Dan
-
TheOldHokie replied to the thread L4400 fel not working.Its low not restricted. Suction side leak Worn out pump. My guess is #2 but I would confirm before replacing. dan
